2019 Coachmen Catalina Summit Travel Trailer RV Power Cord

Hey Jason, thanks for reaching out! Yes, you can use the Weigh Safe Flap Jack Folding RV Stabilizing Blocks #WS78ER for holding your slide-in camper up with the HappiJac system. An alternative is the Lift Extenders Kit #LC182495 which offer a 6"…

Hey Bb, we do have the Curt weight distribution shank part #17120 which can do a drop of up to 6-1/8 inches which would be perfect for either the Fastway kit you mentioned or the Curt system part #C95MJ you referenced. Which system do you have?

Hey Paul, the thermostat that comes with the Furrion Chill Cube part #FR69TD does have the ability to control a furnace so you could wire you current furnace thermostat controls to it. Or if you have a thermostat you are already using for the furnace…

I recommend upgrading to the SmartPlug RV Power Cord and Black Inlet part #SM69FR which will cut down on the heat being transferred to the plug. The old styles typically have a pretty loose fit which will create heat build and in extreme cases, can…

According to the manufacturer the pipe is the 1 inch schedule 40 pipe which means the inner diameter is 1 inch and the outer diameter is 1-5/16" so the attached video and the video are correct. I have also attached a photo from the manufacturer…

Hey Gio! When the GE Profile RV Refrigerator w/ Freezer #GE78FR is running at normal operating temperature the amp draw will be 6A-8A. The maximum amp draw is 20A. Are you adding the fridge to a new setup or is this replacing an existing fridge in…

Hey David, thanks for reaching out! The closest combination we can get for you is the SmartPlug RV/Marine Data Port Inlet #SM36MJ and then getting the Keystone Single Jack Ethernet Connector #SM38MJ along with the ethernet adapter for your Starlink…

The plastic that comes on the 50A SmartPlug RV Power Inlet and Connector #SM76FR is very durable and you'll be happy with it for years to come. The reason why SmartPlug offers the Stainless Steel alternative, Kit #SM96FR, is because they…

I spoke with the manufacturer of the SmartPlug RV and Marine Power Inlet and Connector #SM67FR and for your application they actually recommend using 6 AWG wire to properly supply your RV with power from the shore power pedestal.

Hey Charles, thanks for reaching out! For extenders we have the 6" Lift Extenders #LC182495 and then for the manual crank we have one with a 4" Long Shaft #LC182436 or an 8" Long Shaft #LC1824362 for your application. We don't have…

We've seen this with some previous customers, so you're definitely not alone in having to wrestle with your power cord! I recommend talking a look at the 30 foot Epicord RV Power Cord with Handle - 50 Amp Male to Twist Lock Female Connector…

I do have some parts for you but we aren't custom trailer builders and adding electric to a trailer is not a simple task. What I can tell you is that most interior lights are 12 volt so if you want outlets, lights, and shore power you'd need…