2012 Forest River Flagstaff Classic Super Lite Travel Trailer RV Power Cord

Hey Jason, thanks for reaching out! Yes, you can use the Weigh Safe Flap Jack Folding RV Stabilizing Blocks #WS78ER for holding your slide-in camper up with the HappiJac system. An alternative is the Lift Extenders Kit #LC182495 which offer a 6"…

Hey Bb, we do have the Curt weight distribution shank part #17120 which can do a drop of up to 6-1/8 inches which would be perfect for either the Fastway kit you mentioned or the Curt system part #C95MJ you referenced. Which system do you have?

Hey Paul, the thermostat that comes with the Furrion Chill Cube part #FR69TD does have the ability to control a furnace so you could wire you current furnace thermostat controls to it. Or if you have a thermostat you are already using for the furnace…

I recommend upgrading to the SmartPlug RV Power Cord and Black Inlet part #SM69FR which will cut down on the heat being transferred to the plug. The old styles typically have a pretty loose fit which will create heat build and in extreme cases, can…

According to the manufacturer the pipe is the 1 inch schedule 40 pipe which means the inner diameter is 1 inch and the outer diameter is 1-5/16" so the attached video and the video are correct. I have also attached a photo from the manufacturer…

Hey Gio! When the GE Profile RV Refrigerator w/ Freezer #GE78FR is running at normal operating temperature the amp draw will be 6A-8A. The maximum amp draw is 20A. Are you adding the fridge to a new setup or is this replacing an existing fridge in…

Hey David, thanks for reaching out! The closest combination we can get for you is the SmartPlug RV/Marine Data Port Inlet #SM36MJ and then getting the Keystone Single Jack Ethernet Connector #SM38MJ along with the ethernet adapter for your Starlink…

The plastic that comes on the 50A SmartPlug RV Power Inlet and Connector #SM76FR is very durable and you'll be happy with it for years to come. The reason why SmartPlug offers the Stainless Steel alternative, Kit #SM96FR, is because they…

I spoke with the manufacturer of the SmartPlug RV and Marine Power Inlet and Connector #SM67FR and for your application they actually recommend using 6 AWG wire to properly supply your RV with power from the shore power pedestal.

Hey Charles, thanks for reaching out! For extenders we have the 6" Lift Extenders #LC182495 and then for the manual crank we have one with a 4" Long Shaft #LC182436 or an 8" Long Shaft #LC1824362 for your application. We don't have…

We've seen this with some previous customers, so you're definitely not alone in having to wrestle with your power cord! I recommend talking a look at the 30 foot Epicord RV Power Cord with Handle - 50 Amp Male to Twist Lock Female Connector…

I do have some parts for you but we aren't custom trailer builders and adding electric to a trailer is not a simple task. What I can tell you is that most interior lights are 12 volt so if you want outlets, lights, and shore power you'd need…