Trailer Lights Specs:
Features:
2-1/8" x 1-3/8" x 1-3/4". Waterproof trailer light illuminates your license plate. Clear lens under polycarbonate housing. Recessed mount with included bracket and grommet. 2-wire design with.180 male bullets.
More Information >Trailer Lights Specs:
Features:
1-13/16" Long x 2-1/2" wide x 2" deep. Single-LED trailer light illuminates your license plate. Chrome-plated steel housing has a built-in flange for surface-mount installation. 2-Wire pigtail with power and ground wires.
More Information >Trailer Lights Specs:
Features:
3-3/8" Long x 2-3/8" wide x 2-3/16" deep. Round, incandescent trailer light illuminates your license plate. Chrome-plated steel housing. Surface mount with mounting ears. Single wire design grounds through the mounting hardware.
More Information >Trailer Lights Specs:
Features:
1-1/2" Diameter round. LED trailer light illuminates your license plate. Great White series features custom-cut lens optics and ultra-bright white diodes. Durable chrome-plated steel housing. Easy, snap-in installation. 2-Wire pigtail.
More Information >Trailer Lights Specs:
Features:
1-1/2" Diameter round. Waterproof trailer light with chrome-plated brass housing illuminates your license plate. Easy, snap-in installation. 2-Wire pigtail includes lead and ground wires. White polycarbonate lens with white LEDs.
More Information >Trailer Lights Specs:
Features:
3/4" Diameter round. Waterproof trailer light illuminates your license plate when mounted with the required bracket (sold separately). 2-Wire pigtail with 0.108 female barrels. Clear lens with white LEDs.
More Information >Trailer Lights Specs:
Features:
1-1/16" Diameter round. Mini LED trailer light illuminates your license plate. Great White series features custom-cut lens optics and ultra-bright white diode. Recessed mount with included grommet. 2-Wire lead design 0.180 bullets.
More Information >Trailer Lights Specs:
Features:
1-5/16" Diam x 2" L on a Base; Chrome-plated armored steel housing; replaceable bulb; surface mount on 2" centers; 1-wire; 1-bulb incandescent
More Information >Trailer Lights Specs:
Features:
1-1/2" Diameter x 2" long. Incandescent trailer light illuminates your license plate. Durable chrome-plated brass construction. Snap-in mounting. 1-Wire design. (1) 67 bulb.
More Information >Trailer Lights Specs:
Features:
1-1/2" Diameter round. Waterproof, incandescent trailer light with illuminates your trailer's license plate. Durable chrome-plated steel housing. Snap-in design secures into 1-1/4" diameter cutout. 1-Wire design. (1) 168 bulb.
More Information >Videos
for RV Exterior Lights
Help Articles
for RV Exterior Lights
Expert Answers
for RV Exterior Lights
Hey Barry, so the GE Profile Propane RV Range with Glass Cover #GE24VR used to come with a glass lid but it looks like they updated it and got rid of that part.
view full answer...Hello Richard, thanks for reaching out. You are correct the Advent AC Units like part #ACM150 are generally not going to be compatible with the Duo-Therm AC systems. Especially since your current unit is so old. Your best option will be to replace…
view full answer...Hello Robert, thanks for reaching out. The best option for this will be to replace your rooftop AC, controller and distribution box. Do you prefer a wall thermostat, or a distribution box with manual controls on the ceiling? We have options for both,…
view full answer...Hey Dick, Extra space for mounting and breathability for the unit itself is why the manufacturer lists the cutout hole needing to be 22-7/16" wide x 15-3/16" tall. That being said if your cutout hole is smaller but can still fit the #HP99ZR…
view full answer...Hey Troy, with the Dometic Penguin II with heat pump part #DMC38ZR you can use a wall thermostat with the part #DMC23ZR and the manual air box part #DMC43ZR but there isn't a remote controller option available at this time.
view full answer...The lens on the RV Oval Porch and Utility Light #RVPL7C is held to the housing with some tabs on the lens that fit slots on the housing. To remove the lens you will need something thin and flat like a knife or small screwdriver to gently pry the lens…
view full answer...Hi Adam; for a plug and play replacement that is compatible with your Dometic setup I recommend the Furrion Chill HE. This will work with your existing thermostat and air distribution box so you only have to swap out the AC unit. You can choose from…
view full answer...I've attached the installation instructions for the Progressive Dynamics Pure Sine Wave Inverter w/ Transfer Switch - Remote - 2,000 Watts - 12V #PD64FR for you below.
view full answer...Hello Manuel, thanks for reaching out. We do offer a replacement for your Dometic 3313195.012 Thermostat. For that, you can use the following: - Replacement Single Zone Thermostat for Dometic RV Air Conditioners - Black #DMC79FR This is basically…
view full answer...I have a solution that may work for you, but we do not currently have any 3" diameter submersible reverse lights. Have a look at the Optronics Backup Light #BU45CB which is a 4-1/4" diameter light that can be mounted to your trailer using…
view full answer...Hey Steven, so we have the Dometic Penguin Ii High Capacity 15k btu RV AC unit part #DMC33ZR which has a heat pump built into it like you are wanting. You will also need the air box part #DMC43ZR. If you were looking for something a little easier on…
view full answer...Based on my research, the Trailer Hub and Drum Assembly - 8,000-lb E-Z Lube Axles #AKHD-865-8-EZ-K will be a replacement for the 90865 Rockwell hub and drum. Both of these hub and drum assemblies are 12-1/4" diameter, have an 8,000 lb capacity,…
view full answer...