2014 Jayco Jay Flight Travel Trailer RV Exterior Lighting

Features:

4" x 1-1/2" Oval. Trailer light with reflector functions as a clearance or side marker light. Durable polycarbonate base and lens. Mounts on surface of trailer - hardware not included. 2-Wire pigtail. P2 rated.

Features:

4" x 1-1/4" Rectangle. Red and amber trailer reflectors meet FMVSS requirements for reflex reflectors. Durable acrylic construction. Self-adhesive backing allows for stick-on application.

Features:

7-9/16" LED turn and parking light is waterproof, and mounts to the surface of your trailer with the built-in flange so you don't need to cut a hole in your trailer. Hardwires with the 3-wire pigtail.

Features:

4" x 2-1/6" Oval. LED trailer light functions as a clearance or side marker light when properly mounted. Built-in reflex reflector. Durable ABS housing. Surface mount - hardware not included. 2-Wire design. P2 rated.

Features:

3-3/16" x 1-7/16" Rectangle. Amber trailer reflector meets FMVSS requirements for reflex reflector. Durable acrylic construction. Self-adhesive backing allows for stick-on application.

Features:

6-7/16" Amber LED turn signal and parking light is waterproof and has a clear lens. Mounts in a cutout with grommet (sold separately) and works with 3-prong plugs.

Features:

This amber GloLight is bright, easy to see, waterproof, and just looks cool. The outer band is a parking light, and the center LEDs act as a turn signal. Mounts in a cutout using a grommet (sold separately) and works with 3-prong plugs.

Features:

6-7/16" Waterproof light acts as a turn signal and parking light. It installs in a cutout with a grommet (sold separately) and mounts flush with your trailer's surface. Works with 3-prong plugs.

Features:

6-1/2" Waterproof, incandescent trailer light acts as a parking light and turn signal and has a shockproof socket. Mounts in a cutout with a grommet (sold separately) and works with 3-prong plug.

Features:

4-1/8" x 2" Oblong. Incandescent trailer light serves as a clearance and side marker light when properly mounted. Premium bulb for long life. Snap-on lens. Surface mount - hardware not included. 1-Wire design. PC rated. (2) 194 bulbs.

Features:

4" x 2-1/16" Oval. Incandescent trailer light serves as a clearance or side marker light when properly mounted. Built-in reflex reflector. Durable ABS housing. Surface mount - hardware not included. 1-Wire design. P2 rated.

Features:

6-1/2" Waterproof trailer light acts as a turn signal/parking light. It mounts in a cutout with a grommet (sold separately) and sits flush with the surface of your trailer. It works with 3-prong plugs. Built-in reflector increases light output.

Features:

4" x 2-1/16". Incandescent trailer light functions as a clearance and side marker light when properly mounted. Dual bulb design increases light output. Snap-on lens. Surface mount to trailer - hardware not included. PC rated. (2) 194 bulbs.

Features:

4-7/16" x 1-15/16" Oval. Amber trailer reflector meets FMVSS requirements for reflex reflector. Durable acrylic construction. Self-adhesive backing allows for stick-on application. Screw holes for surface mounting.

Features:

3-1/8" x 1-3/8" Rectangle amber reflector. Durable acrylic construction. Self-adhesive backing allows for stick-on application.

Features:

4-1/2" x 3-3/4" Oval. Low-profile trailer reflector increases visibility of vehicle in low lighting. Durable aluminum housing. Surface mount to trailer - hardware not included.

Features:

6-1/2" Waterproof LED trailer light acts as a turn signal and parking light. Mounts in a cutout with a grommet (sold separately) and works with 3-prong plug.

Features:

This rectangular, amber reflective sticker is designed for use on the side or rear of your truck, trailer, or equipment. The tough polyester reflector stands up to outdoor use. Simple installation with adhesive backing. SAE J578 and J594 compliant.

Features:

6-1/2" LED turn signal and parking light is waterproof and has a single diode that brightens for turning. Mounts in a cutout with grommet (sold separately) and works with 3-prong plugs.

Features:

3-7/8" x 1-1/4" Rectangle. Amber trailer reflector meets FMVSS requirements for reflex reflector. Durable acrylic construction. Self-adhesive backing allows for stick-on application.

Features:

3-3/16" Diameter. Yellow trailer reflector enhances visibility on the road. Durable acrylic construction. Self-adhesive backing allows for stick-on application. Meets FMVSS requirements.

Features:

2-3/4" x 1-3/4" Rectangle. Low-profile trailer reflector increases visibility of vehicle in low lighting. Spitfire design has 50 percent wider angle of reflectivity than conventional reflectors. Adhesive backing for easy install.

Features:

4" x 2-1/16". Waterproof, incandescent trailer light serves as a clearance or side marker light when properly mounted. Built-in reflex reflector. Surface mount to trailer - hardware not included. 1-Wire design. P2 rated. (1) 194 Bulb.

Features:

6-1/2" Amber LED turn signal and parking light is waterproof. Mounts in cutout using a grommet (sold separately) and works with 3-prong plugs.

Features:

3-3/16" x 1-11/16" Rectangle. Low-profile trailer reflector increases visibility of vehicle in low lighting. Chrome bezel provides a finished look when installed. Simple installation with adhesive backing.

Features:

2-3/16" Diameter amber trailer reflector enhances visibility on the road. Durable acrylic construction. Surface mounts with a single screw (not included). Meets FMVSS requirements.

Features:

This GloLight is bright, easy to see, waterproof, and just looks cool. The outer band is a parking light, and the center LEDs act as a turn signal. Mounts in a cutout using a grommet (sold separately) and works with 3-prong plugs.

Features:

4-5/16" x 1-11/16" Rectangle amber reflector. Self-adhesive backing allows for stick-on application.

Features:

2-3/16" Diameter amber trailer reflector enhances visibility on the road. Durable acrylic construction. Surface mounts with adhesive backing. Meets FMVSS requirements.

Features:

3-3/16" Diameter. Amber trailer reflector enhances visibility on the road. Durable acrylic construction. Surface mounts with adhesive backing. Meets FMVSS requirements.

Features:

6-1/2" x 2-1/4" LED works as either a front or rear turn signal light. Mounts in a cutout with a grommet (sold separately) and works with 3-prong plugs.

Features:

2-7/8" Diameter round. Low-profile trailer reflector increases visibility of vehicle in low lighting. Spitfire design has 50 percent wider angle of reflectivity than conventional reflectors. Adhesive backing for easy install.

Features:

3" Diameter amber trailer reflector enhances visibility on the road. Designed for use on side or rear of your truck, trailer, or equipment. Durable polyester construction for outdoor use. Surface mount adhesive backing. J578 and J594 compliant

Features:

6-1/2" Waterproof light acts as a turn signal and parking light. Installs in a cutout with a grommet (sold separately) and mounts flush with your trailer's surface. It works with 3-prong plugs. Built-in reflector increases light output.

Features:

4-3/8" x 1-15/16" Oval. Amber trailer reflector enhances visibility on the road. Durable acrylic construction. Self-adhesive backing allows for stick-on application. Screw holes for surface mounting. Meets FMVSS requirements.

Features:

3-3/16" Diameter amber trailer reflector enhances visibility on the road. Durable acrylic construction. Surface mounts with a single screw (not included). Meets FMVSS requirements.