Trailer Lights Specs:
Features:
...Compatible with 12V DC systems Mounts on surface of trailer with built-in license plate bracket - hardware not included 3-Wire pigtail White wire for ground Black wire for tail light Green wire for stop/turn...
More Information >Trailer Lights Specs:
Features:
...2.65 amps Tail light: 2.1 amps 3-Year warranty Surface-Mount Light Surface-mount trailer lights install using a flange or bracket with mounting holes. These lights lay flat against the trailer surface...
More Information >Trailer Lights Specs:
Features:
...with less power output No bulbs to replace - no brittle filaments Durable black ABS plastic base and snap-on lens Red lens over white LEDs Compatible with 12V DC systems Mounts on surface of trailer ...
More Information >Trailer Lights Specs:
Features:
...6" Surface-Mount Light Surface-mount trailer lights install using a flange or bracket with mounting holes. These lights lay flat against the trailer surface and only require a small, often pre-exist...
More Information >Trailer Lights Specs:
Features:
...power output No bulbs to replace - no brittle filaments Snap-on chrome housing Durable polycarbonate housing and lens Clear lens over white LEDs Compatible with 12V DC systems Surface mount to trailer...
More Information >Trailer Lights Specs:
Features:
...as a front or rear clearance light and one as a side marker light. Surface-Mount Light Surface-mount trailer lights install using a flange or bracket with mounting holes. These lights lay flat against...
More Information >Trailer Lights Specs:
Features:
...as a front or rear clearance light and one as a side marker light. Surface-Mount Light Surface-mount trailer lights install using a flange or bracket with mounting holes. These lights lay flat against...
More Information >Trailer Lights Specs:
Features:
...power output No bulbs to replace - no brittle filaments Snap-on chrome-plated polycarbonate housing Clear lens over white LEDs Surface mount with foam gasket - hardware included 2-Wire design includes...
More Information >Trailer Lights Specs:
Features:
...be easily replaced Durable ABS black plastic base Screw-on acrylic lens Surface mounts on trailer - hardware not included Single-wire design grounds through the mounting hardware P2 rated Specs: Dimensions...
More Information >Trailer Lights Specs:
Features:
...LEDs Compatible with 12V DC systems Surface mount to trailer - hardware not included 2-Wire design includes power lead and ground wire DOT compliant P2 rated Specs: Dimensions: 4" long ...
More Information >Trailer Lights Specs:
Features:
...Compatible with 12V DC systems Stud mount to trailer - hardware not included Single wire design grounds through mounting hardware Specs: Dimensions: 4" long x 1-3/4" wide x 2-5/...
More Information >Trailer Lights Specs:
Features:
...span>Surface-Mount Light Surface-mount trailer lights install using a flange or bracket with mounting holes. These lights lay flat against the trailer surface and only require a small, often pre-existing hole...
More Information >Trailer Lights Specs:
Features:
...Series provides bright light using fewer diodes than other LED lights Durable surface-mount technology (SMT) construction of LED circuit board Better withstands shock and vibration Allows for improved heat...
More Information >Trailer Lights Specs:
Features:
...Light angles down to illuminate your trailer's license plate Black polycarbonate housing Clear lens Incandescent bulb is replaceable Mounts on surface of trailer with built-in ear-mount
More Information >
Trailer Lights Specs:
Features:
...Trailer light angles down to illuminate your trailer's license plate Durable surface-mount technology (SMT) construction of LED circuit board Better withstands shock and vibra...
More Information >Trailer Lights Specs:
Features:
...output No bulbs to replace - no brittle filaments Durable polycarbonate housing and lens Clear lens over white LEDs Compatible with 12V DC systems Surface mount to trailer with ABS plastic mounting bracket...
More Information >Trailer Lights Specs:
Features:
...Replaceable incandescent bulb Clear lens for license plate light License plate mounting bracket is built in Mounts on surface of trailer - hardware not included 3-Wire pigtail White wire for ground Black wire...
More Information >Trailer Lights Specs:
Features:
...LEDs Compatible with 12V DC systems Surface mount to trailer - hardware not included 2-Wire pigtail with power lead and ground wire DOT compliant P2 rated Specs: Dimensions: 4" long x 2&quo...
More Information >Trailer Lights Specs:
Features:
...Diodes: 1 Power draw at 12.8 volts: 0.054 amps Lifetime warranty on LEDs Surface-Mount Light Surface-mount trailer lights install using a flange or bracket with mounting holes. These lights lay flat...
More Information >Trailer Lights Specs:
Features:
...base Red acrylic lens can be easily replaced Clear lens for license plate light Mounts on surface of trailer - hardware not included 3-Wire pigtail White wire for ground Black wire for tail light Green...
More Information >Trailer Lights Specs:
Features:
...Light angles down to illuminate your trailer's license plate Incandescent bulb is replacable Durable, chrome-plated steel housing Clear polycarbonate lens Surface mount to tra...
More Information >Trailer Lights Specs:
Features:
...on center): 3" Diodes: 10 Power draw at 12.8V: 0.087 amps Lifetime warranty on LEDs Surface-Mount Light Surface-mount lights install flat against the surface of the trailer, so a hole does not ...
More Information >Trailer Lights Specs:
Features:
...LEDs Compatible with 12V DC systems Surface mount to trailer - hardware not included 2-Wire design includes power lead and ground wire DOT compliant P2 rated Specs: Dimensions: 4" long ...
More Information >Trailer Lights Specs:
Features:
...dimensions: 8-5/8" long x 3-3/16" tall x 2-1/4" deep Bulb type: 1157 bulb Power draw at 12.8 volts: Stop light: 2.65 amps Tail light: 2.1 amps 3-Year warranty Surface-Mount Light Surfa...
More Information >Trailer Lights Specs:
Features:
...can be easily replaced Durable white ABS plastic base Red snap-on lens over incandescent bulb Compatible with 12V DC electrical systems Surface mount on trailer - hardware not included Twist-in socket...
More Information >Trailer Lights Specs:
Features:
...Rectangular RV tail light serves 3 functions Stop light Tail light Turn signal light ONE Series provides bright light using fewer diodes than other LED lights Durable surface-mount
More Information >
Trailer Lights Specs:
Features:
...replaceable Red lens over white LEDs Compatible with 12V DC electrical systems Mounts on surface of trailer - hardware not included 2-Wire pigtail with power lead and ground wire DOT compliant P2 rated Specs...
More Information >Trailer Lights Specs:
Features:
...no brittle filaments Durable white ABS housing and acrylic lens Amber lens over white LEDs Compatible with 12V DC systems Surface mount to trailer - hardware not included 3-Wire design with power...
More Information >Trailer Lights Specs:
Features:
...lead length: 6" Surface-Mount Light Surface-mount trailer lights install using a flange or bracket with mounting holes. These lights lay flat against the trailer surface and only require a s...
More Information >Trailer Lights Specs:
Features:
...Reference Light will work as an exact replacement for: Uni Bond # DL2020 Grote # 60151 Peterson # M434 Surface-Mount Light Surface-mount trailer lights install using a flange...
More Information >Trailer Lights Specs:
Features:
...can be easily replaced Durable ABS plastic base Red lens over incandescent bulb Compatible with 12V DC electrical systems Surface mount on trailer - hardware not included Twist-in socket secures bulb...
More Information >Trailer Lights Specs:
Features:
...span>mounting holes (center to center): 3" Power draw at 12V: 0.35 amps Wire lead length: 7" Voltage: 14 volts Wattage: 4.9 watts Surface-Mount Light Surface-mount trailer lights install using ...
More Information >Trailer Lights Specs:
Features:
...as both. If you need both functions, then you must install 2 separate lights on your trailer - one as a front or rear clearance light and one as a side marker light. Surface-Mount Light Surface-mount...
More Information >Trailer Lights Specs:
Features:
...Rectangular RV tail light serves 3 functions Stop light Tail light Turn signal light ONE Series provides bright light using fewer diodes than other LED lights Durable surface-mount
More Information >
Trailer Lights Specs:
Features:
...over incandescent bulb Compatible with 12V DC systems Stud mount to trailer with included studs Single wire design grounds through mounting hardware DOT compliant Specs: Dimensions: 2-5/8" wi...
More Information >Trailer Lights Specs:
Features:
...3" Diodes: 10 Power draw at 12.8V: 0.087 amps Lifetime warranty on LEDs Surface-Mount Light Surface-mount lights install flat against the surface of the trailer, so a hole does not need to be c...
More Information >Trailer Lights Specs:
Features:
...on center): 3-1/4" Bulb type: 168 Power draw at 12V: 0.35 amps Limited 1-year warranty Surface-Mount Light Surface-mount trailer lights install using a flange or bracket with mounting holes. These li...
More Information >Trailer Lights Specs:
Features:
...holes (center on center): 3" Diodes: 10 Power draw at 12.8V: 0.087 amps Lifetime warranty on LEDs Surface-Mount Light Surface-mount lights install flat against the surface of the trailer, so a ...
More Information >Trailer Lights Specs:
Features:
...for separate reflector Weather and corrosion resistant Single-wire design grounds through the mounting hardware Surface mounts on 3-5/16" centers with ear-mount base Dimensions: 3-7/8" L...
More Information >Trailer Lights Specs:
Features:
...center on center): 3" Diodes: 10 Power draw at 12.8V: 0.087 amps Lifetime warranty on LEDs Surface-Mount Light Surface-mount lights install flat against the surface of the trailer, so a hole d...
More Information >Trailer Lights Specs:
Features:
...hardware. Red light functions as clearance, side marker light Weather and corrosion resistant Dual bulbs increase light output Single-wire design grounds through mounting hardware Surface mounts on 3&q...
More Information >Trailer Lights Specs:
Features:
...systems Surface mount to trailer with mounting bracket - hardware not included 2-Wire design with power and ground wire DOT compliant Specs: Dimensions: 8-5/8" Long x 3-1/4" wide ...
More Information >Trailer Lights Specs:
Features:
...the mounting hardware. Amber light functions as clearance, side marker light Weather and corrosion resistant Dual bulbs increase light output Single-wire design grounds through mounting hardware Surface mounts...
More Information >Trailer Lights Specs:
Features:
...and a side marker light or as a rear clearance light and side marker light. Surface-Mount Light Surface-mount trailer lights install using a flange or bracket with mounting holes. These lights lay flat against...
More Information >Trailer Lights Specs:
Features:
...The bulb is protected in the housing and can be easily replaced. The base surface mounts on 2" centers. The light contains a single lead wire for power and is grounded through the mounting hardw...
More Information >Trailer Lights Specs:
Features:
...and bulb Surface mounts on 3-7/8" centers Single-wire design grounds through mounting hardware Dimensions: 4-25/32" L x 2-1/8" W x 1-3/8" D Manufacturer Cross Refere...
More Information >Trailer Lights Specs:
Features:
...Limited 1-year warranty Surface-Mount Light Surface-mount trailer lights install using a flange or bracket with mounting holes. These lights lay flat against the trailer surface and only require a small...
More Information >Trailer Lights Specs:
Features:
...Gray-coated license-plate light Surface mount Mounting hardware and adhesive not included Single-wire design Replaceable bulb Uses replaceable bulb #168 2-5/8" Long...
More Information >Trailer Lights Specs:
Features:
...and a side marker light or as a rear clearance light and side marker light. Surface-Mount Light Surface-mount trailer lights install using a flange or bracket with mounting holes. These lights lay flat against...
More Information >Trailer Lights Specs:
Features:
...replaced Durable chrome-plated brass construction Clear lens over incandescent bulb Compatible with 12V DC systems Snap-in mounting - light easily clips into 1-1/4" diameter mounting hole Single ...
More Information >Trailer Lights Specs:
Features:
...span>Mounts on surface of trailer - hardware not included Twist-in bulb socket with power lead and ground wire DOT compliant P2 rated Specs: Dimensions: 4" long x 2" tall x 1" ...
More Information >Trailer Lights Specs:
Features:
...span>Mounts on surface of trailer - hardware not included Twist-in bulb socket with power lead and ground wire DOT compliant P2 rated Specs: Dimensions: 4" long x 2" tall x 1-1/8" de...
More Information >Videos
for RV Exterior Lights
Help Articles
for RV Exterior Lights
Expert Answers
for RV Exterior Lights
A 16 inch tire will not fit on a 16.5 inch wheel. You would either need to get new 16 inch wheels with the proper bolt pattern to match what the hubs require or to get your existing wheels you would need to go with 16.5 inch tires. You mentioned…
view full answer...I would love to help you upgrade the suspension on your Twilight 2800 travel trailer. The MORryde Rubber Equalizers for Tandem Axle Trailers #MR87ZR that you referenced are a great solution but we do need to double check a few things. First is that…
view full answer...The temperature light on your Everchill RV Refrigerator w/ Freezer #324-000119 is likely flashing because of a lack of full power to the fridge. The fridge requires 11 amps. It is likely trying to use more power than what is available which is why…
view full answer...For the LCI52-SB-86.5-68.5, the two ending measurements are: 1st - measurement from hub to hub, meaning the length of the axle in this case is 86.5 inches. 2nd - spring seat dimension where…
view full answer...Thank you for purchasing from etrailer! You did a great job selecting compatible parts. When using Leaf Springs #e64SR with the #AP233 Equalizer Kit and the #H248 Hanger Kit, there should be…
view full answer...The best option we offer for your dump trailer is the Erickson Mesh Tarp and Truck Bed Cover part #EM57059 which measures…
view full answer...If your current springs have 5 leaves then going to a 7 leaf spring will increase the height of the trailer a little and make the trailer more susceptible to sway. Regarding capacity if you go with springs rated higher than what is required it will…
view full answer...The first thing to do is disconnect the trailer from the Liberty. Then using a circuit tester, like part #PTW2993, test each pin of the 4-Way. Clip the alligator clip of the circuit tester to the exposed post, the ground wire. Check each pin with…
view full answer...I agree it is the right time to upgrade to a Lithium charger/converter as not all are Lithium compatible. I recommend using the Progressive Dynamics Mighty Mini AC/DC Panel and Converter/Smart Charger - 60 Amp #PD4060K which is a replacement for…
view full answer...The Dexter 10K electric brakes #23-439 (right side) and #23-438 (left side) will have to be manually adjusted using the adjustment wheel below the magnet. To adjust the brakes you will use a small screwdriver or similar tool to turn the adjustment…
view full answer...I checked directly with BOLT for you, and they confirmed for me that your 2021 Chevy Silverado is absolutely compatible with their trailer hitch locks. Take a look at the accompanying photo, and if you have the same center cut key, the correct lock…
view full answer...The Bolt hitch lock part #BL7023582 that you referenced does fit your 2014 GMC Sierra 1500. I attached a chart that has all of the vehicle this works with. I also attached a link to a review video for this lock for you to check out as well.
view full answer...