Trailer Lights Specs:
Features:
...Light angles down to illuminate your trailer's license plate Durable surface-mount technology (SMT) construction of LED circuit board Better withstands shock and vibration Al...
More Information >Trailer Lights Specs:
Features:
...the strongest adhesive in the business, and 100% of the tape sticks to the surface you are applying to - there are no grid lines or pockets to fill with water and cause tape lift. The technologically advanced...
More Information >Trailer Lights Specs:
Features:
...power output No bulbs to replace - no brittle filaments Snap-on chrome housing Durable polycarbonate housing and lens Clear lens over white LEDs Compatible with 12V DC systems Surface mount to trailer...
More Information >Trailer Lights Specs:
Features:
...6" Surface-Mount Light Surface-mount trailer lights install using a flange or bracket with mounting holes. These lights lay flat against the trailer surface and only require a small, often pre-exist...
More Information >LED Strip Lights Specs:
Features:
...outdoor locations. Surface-Mount Light Surface-mount trailer lights install using a flange or bracket with mounting holes. These lights lay flat against the trailer surface and only require a small, often...
More Information >RV Exterior Lights Specs:
Features:
...and housing Snap-in lens allows for easy replacement Clear lens over white LEDs Mounts on surface of RV - hardware included 2-wire pigtail includes ground and lead wires Specs: Dimensions: 6" lo...
More Information >Trailer Lights Specs:
Features:
...power output No bulbs to replace - no brittle filaments Snap-on chrome-plated polycarbonate housing Clear lens over white LEDs Surface mount with foam gasket - hardware included 2-Wire design includes...
More Information >RV Exterior Lights Specs:
Features:
...Clear lens over white LEDs Mounts on surface of RV - hardware included 2-wire pigtail includes ground and lead wires Specs: Dimensions: 6" long x 3-1/2" tall x 2" deep Di...
More Information >Work Lights Specs:
Features:
...No bulbs to replace - no brittle filaments Durable die-cast aluminum housing and polycarbonate lens Clear lens with white LEDs Compatible with 12V DC systems Surface mount - hardware included 2-Wire pigtail...
More Information >Trailer Lights Specs:
Features:
18" L x 2" W; alternating red/white reflector tape; 8 strips; DOT certified; rated for 7 years of use
More Information >LED Strip Lights Specs:
Features:
...filaments Polished chrome finish on polycarbonate housing Clear polycarbonate lens with white LEDs Sealed, waterproof construction has an IP67 rating Flat base for surface mounting 2-Wire pigtail - includes...
More Information >Trailer Lights Specs:
Features:
...for application and mount with peel-and-stick adhesive backing Hardwires to any 12-volt power source with 2-Wire pigtail Available snap-on connector allows you to easily attach 2 sections of LED light strip (A90P1B...
More Information >Trailer Lights Specs:
Features:
21' L x 2" wide; alternating red/white reflector tape; DOT certified; rated for 7 years of use
More Information >Work Lights Specs:
Features:
...housing and lens Clear lens over white LEDs Compatible with 12V DC systems Surface mount with built-in flange - no panel cutout required 2-Wire design includes power lead and ground wire Specs: Dimensions...
More Information >Trailer Lights Specs:
Features:
...Trailer light angles down to illuminate your trailer's license plate Durable surface-mount technology (SMT) construction of LED circuit board Better withstands shock and vibra...
More Information >RV Exterior Lights Specs:
Features:
...Snap-in lens allows for easy replacement Clear lens over white LEDs Compatible with 12V DC systems Mounts on surface of RV - hardware included 2-Wire pigtail includes power lead and ground wire Specs...
More Information >Trailer Lights Specs:
Features:
...Light angles down to illuminate your trailer's license plate Black polycarbonate housing Clear lens Incandescent bulb is replaceable Mounts on surface of trailer with built-in ear-mount
More Information >
Trailer Lights Specs:
Features:
...Dimensions: 8-5/8" long x 3-1/4" tall x 1-15/16" deep Distance between mounting holes (center on center): 3-1/2" Diodes: 1 10-Year limited warranty Surface-Mount Light Surface-mo...
More Information >LED Strip Lights Specs:
Features:
...to replace - no brittle filaments Durable polycarbonate lens Clear lens with white LEDs Compatible with 12V DC systems Surface mounts to a flat surface with wedge base - hardware not included 2-Wire design ...
More Information >RV Exterior Lights Specs:
Features:
...the light running at peak efficiency position it in direct sunlight during daylight hours. The lower section of the light contains 84 surface-mount LEDs that produce a bright white light that is ideal...
More Information >LED Strip Lights Specs:
Features:
...polycarbonate housing and lens Clear lens with white LEDs Compatible with 12V DC systems Surface mounts to a flat surface with wedge base - hardware not included 2-Wire design - includes ground wire and lead wire...
More Information >RV Exterior Lights Specs:
Features:
...4-7/8" Diodes: 18 Power draw at 12V: 0.295 amps Lifetime warranty on LEDs Surface-Mount Light Surface-mount RV lights install using a flange or bracket with mounting holes. These lights lay flat again...
More Information >RV Exterior Lights Specs:
Features:
...waterproof housing and lens unit is submersible Durable surface-mount technology (SMT) construction of LED circuit board Better withstands shock and vibration Allows for improved heat distribution LEDs make...
More Information >Trailer Lights Specs:
Features:
...to replace - no brittle filaments Durable polycarbonate housing and lens Clear lens over white LEDs Surface mount - hardware not included 2-Wire design - includes lead wire for power and ground wire Specs...
More Information >RV Exterior Lights Specs:
Features:
...4-7/8" Diodes: 16 Power draw at 12V: 0.32 amps Lifetime warranty on LEDs Surface-Mount Light Surface-mount RV lights install using a flange or bracket with mounting holes. These lights lay flat again...
More Information >Trailer Lights Specs:
Trailer Lights Specs:
Features:
...the strongest adhesive in the business, and 100% of the tape sticks to the surface you are applying to - there are no grid lines or pockets to fill with water and cause tape lift. The technologically advanced...
More Information >RV Exterior Lights Specs:
Features:
...in the USA Specs: Dimensions: 5-3/4" long x 3-1/8" tall x 1-1/2" deep Diodes: 12 Wire length: 4" 1-Year limited warranty Surface-Mount Light Surface-mount trailer l...
More Information >RV Exterior Lights Specs:
Features:
...span>Surface-Mount, Bolt-On Installation This surface-mount porch light is incredibly easy to install either as an upgrade or as a replacement of your existing light. To access the bolt holes, pop the lens off...
More Information >Trailer Lights Specs:
Features:
4" x 1-1/4" Rectangle. Red and amber trailer reflectors meet FMVSS requirements for reflex reflectors. Durable acrylic construction. Self-adhesive backing allows for stick-on application.
More Information >RV Exterior Lights Specs:
Features:
...on surface of trailer - hardware not included 2-Wire pigtail includes power lead and ground wire Specs: Dimensions: 2-5/16" long x 2-5/16" tall x 7/16" deep Light type: wa...
More Information >RV Exterior Lights Specs:
Features:
...Clear, rectangular RV light functions as a porch and utility light Corrosion resistant Replaceable lens and bulb Toggle-button on/off switch Tested and approved by UL and CSA Surface mounts
More Information >
Trailer Lights Specs:
Features:
...1-11/16" wide x 2-1/4" deep Distance between mounting holes (center on center): 3-1/2" Diodes: 2 Power draw at 12V: 0.01 amps 10-Year limited warranty Surface-Mount Light Surface-mount<...
More Information >Trailer Lights Specs:
Features:
...Diodes: 1 Power draw at 12.8 volts: 0.054 amps Lifetime warranty on LEDs Surface-Mount Light Surface-mount trailer lights install using a flange or bracket with mounting holes. These lights lay flat...
More Information >RV Exterior Lights Specs:
Features:
...the light running at peak efficiency position it in direct sunlight during daylight hours. The lower section of the light contains 168 surface-mount LEDs that produce a bright white light that is ideal...
More Information >Trailer Lights Specs:
Features:
...Light angles down to illuminate your trailer's license plate Sonically sealed, polycarbonate housing and lens are waterproof Durable surface-mount technology (SMT) construction of...
More Information >Trailer Lights Specs:
Features:
...tall x 5/8" deep Distance between mounting holes (center on center): 2" Diodes: 1 10-Year limited warranty Surface-Mount Light Surface-mount trailer lights install using a flange o...
More Information >Trailer Lights Specs:
Features:
...Compatible with 12V DC systems Surface mount to trailer above license plate - hardware not included 2-Wire design with 0.180 bullets DOT compliant Made in the USA Specs: Dimensions: 3" long x 1-1...
More Information >Trailer Lights Specs:
Features:
...a single unit, which means that water will not get into the light and damage the diodes or circuit board. Surface-Mount Light Surface-mount trailer lights install using a flange or bracket with mounting...
More Information >Trailer Lights Specs:
Features:
...span>mounting holes (center to center): 3" Power draw at 12V: 0.35 amps Wire lead length: 7" Voltage: 14 volts Wattage: 4.9 watts Surface-Mount Light Surface-mount trailer lights install using ...
More Information >Trailer Lights Specs:
Features:
...Light angles down to illuminate your trailer's license plate Incandescent bulb is replacable Durable, chrome-plated steel housing Clear polycarbonate lens Surface mount to tra...
More Information >RV Exterior Lights Specs:
Features:
...you can see in the dark. Surface-Mount, Bolt-On Installation This surface-mount porch light is incredibly easy to install either as an upgrade or as a replacement of your existing light. To access...
More Information >Trailer Lights Specs:
Features:
...lead length: 6" Surface-Mount Light Surface-mount trailer lights install using a flange or bracket with mounting holes. These lights lay flat against the trailer surface and only require a s...
More Information >RV Exterior Lights Specs:
Features:
...on center): 3-3/4" Lumen output: 4,000 Diodes: 4 Wire length: 6" 1-Year limited warranty Surface-Mount Light Surface-mount trailer lights install using a flange or bracket with mounting
More Information >
RV Exterior Lights Specs:
Features:
...span>mounting holes (center on center): 4-7/8" Diodes: 16 Power draw at 12V: 0.32 amps Lifetime warranty on LEDs Surface-Mount Light Surface-mount RV lights install using a flange or bracket with mounting
More Information >
Trailer Lights Specs:
Features:
...The housing and lens are sonically sealed together to create a single unit, which means that water will not get into the light and damage the diodes or circuit board. Surface-Mount Light Surface-mount trailer...
More Information >RV Exterior Lights Specs:
Features:
...DC Power draw: 0.98 amps Wattage: 3.8 watts 1-Year limited warranty Surface-Mount RV Porch Light Surface-mount RV porch lights install using pre-drilled mounting holes in the housing. These lights lay...
More Information >RV Exterior Lights Specs:
Features:
...replacement Clear lens over white LEDs Mounts on surface of RV - hardware included 2-wire pigtail includes ground and lead wires Specs: Dimensions: 9-3/4" long x 3-1/2" tall x 2-...
More Information >RV Exterior Lights Specs:
Features:
...plastic housing resists corrosion Snap-on clear lens covers incandescent bulb Compatible with 12V DC systems Surface mount installation - hardware not included 2-Wire design includes power lead and ground...
More Information >RV Exterior Lights Specs:
Features:
...aluminum housing is corrosion resistant Clear polycarbonate lens is less likely to shatter than a glass lens Surface mount - hardware not included Mounts directly to trailer surface on 2-15/16" cen...
More Information >Work Lights Specs:
Features:
...LEDs 2-wire pigtail - includes power lead and ground wire Mounts on surface of trailer - hardware not included Specs: Dimensions: 12-3/8" long x 1" tall x 7/16" thick Di...
More Information >RV Exterior Lights Specs:
Features:
...1-1/2" deep Diodes: 39 Wire length: 5" 1-Year limited warranty Surface-Mount RV Dome Light Surface-mount RV dome lights install using pre-drilled mounting holes in the housing. These lights...
More Information >LED Strip Lights Specs:
Features:
...LED light strip attaches to awnings to provide sideways light Warm white light with light starkness Compatible with Thule mounting rail TH301644 Can be used both when the awning is opened...
More Information >RV Exterior Lights Specs:
Features:
...span>mounting holes (center on center): 4-7/8" Diodes: 16 Power draw at 12V: 0.295 amps Lifetime warranty on LEDs Surface-Mount Light Surface-mount RV lights install using a flange or bracket with mounting
More Information >
RV Exterior Lights Specs:
Features:
...Distance between mounting holes (center on center): 4-3/4" Lumen output: 4,000 Diodes: 4 Wire length: 6" 1-Year limited warranty Surface-Mount Light Surface-mount trailer lights inst...
More Information >RV Exterior Lights Specs:
Features:
...long x 4-11/16" wide x 2" deep Light output: 357 lumens Diodes: 21 Wattage: 3.8 watts Power draw at 12V: 0.32 amps Wire length: 7" 1-Year limited warranty Surface-Mount ...
More Information >Trailer Lights Specs:
Features:
...trailer. The housing and lens are sonically sealed together to create a single unit, which means that water will not get into the light and damage the internal components. Surface-Mount Light Surface-mount...
More Information >RV Exterior Lights Specs:
Features:
...0.98 amps Wattage: 3.8 watts 1-Year limited warranty Surface-Mount RV Porch Light Surface-mount RV porch lights install using pre-drilled mounting holes in the housing. These lights lay flat against...
More Information >LED Strip Lights Specs:
Features:
...lumens Diodes: 9 Power draw at 12V: 0.375 amps IP rating: IP67 Lifetime warranty on LEDs Surface-Mount Light Surface-mount trailer lights install using a flange or bracket with mounting holes. These lights...
More Information >RV Exterior Lights Specs:
Features:
...wide x 2" deep Light output: 357 lumens Diodes: 21 Wattage: 3.8 watts Power draw at 12V: 0.32 amps Wire length: 7" 1-Year limited warranty Surface-Mount RV Porch Light Surface-mount...
More Information >Work Lights Specs:
Features:
...sealed, waterproof housing and lens unit is submersible Durable surface-mount technology (SMT) construction of LED circuit board Better withstands shock and vibration Allows for improved heat distribution...
More Information >Trailer Lights Specs:
Features:
...over incandescent bulb Compatible with 12V DC systems Stud mount to trailer with included studs Single wire design grounds through mounting hardware DOT compliant Specs: Dimensions: 2-5/8" wi...
More Information >Work Lights Specs:
Features:
...span>Surface mounts to trailer - hardware not included 2-Wire design with 0.156 male bullets includes power lead and ground wire Specs: Overall dimensions: 2-1/2" long x 1-1/16" tall ...
More Information >LED Strip Lights Specs:
Features:
...won't have to worry about replacing bulbs that have brittle filaments. And because LEDs draw minimal power, the light won't drain your battery or overload your circuits. Surface-Mount, ...
More Information >Trailer Lights Specs:
Features:
18" L x 2" W; alternating red/white reflector tape; 4 strips; DOT certified; rated for 7 years of use
More Information >RV Exterior Lights Specs:
Features:
...span>Surface-Mount Light Surface-mount trailer lights install using a flange or bracket with mounting holes. These lights lay flat against the trailer surface and mounting hardware is used to secure the light...
More Information >Trailer Lights Specs:
Features:
...polycarbonate lens and gray housing Surface mount with ear-mount base - hardware not included Accepts industry standard 2-prong plug (sold separately) Specs: Qty: 1 license plate light Overall dimensions...
More Information >Trailer Lights Specs:
Features:
...Trailer reflector increases visibility of vehicle at night and in low lighting Chrome bezel provides a finished look Surface mount to trailer with adhesive backing Meets FMVSS 108 standards...
More Information >Work Lights Specs:
Features:
...housing and lens Clear lens over white LEDs Compatible with 12V DC systems Surface mount with built-in flange - no cutout required Adhesive back allows for easy application Accepts industry standard 2-prong...
More Information >RV Exterior Lights Specs:
Features:
...plastic housing resists corrosion Snap-on clear lens covers incandescent bulb Compatible with 12V DC systems Surface mount installation - hardware not included 2-Wire design includes power lead and ground...
More Information >Trailer Lights Specs:
Features:
...on center): 3-1/4" Bulb type: 168 Power draw at 12V: 0.35 amps Limited 1-year warranty Surface-Mount Light Surface-mount trailer lights install using a flange or bracket with mounting holes. These li...
More Information >Trailer Lights Specs:
Features:
3-3/16" x 1-7/16" Rectangle. Red trailer reflector meets FMVSS requirements for reflex reflector. Durable acrylic construction. Self-adhesive backing allows for stick-on application.
More Information >Trailer Lights Specs:
Features:
...and housing Clear lens over incandescent bulb Compatible with 12V DC systems Multiple mounting options Flush mount with grommet (A91GB - sold separately) Surface mount with bracket (A91BB - sold separately...
More Information >Work Lights Specs:
Features:
...Low-profile, oval utility light provides bright white light for your application Durable surface-mount technology (SMT) construction of LED circuit board Better withstands shock...
More Information >RV Exterior Lights Specs:
Features:
...and housing Snap-in lens allows for easy replacement Amber lens with white LEDs Mounts on surface of trailer - hardware included 2-wire pigtail includes ground and lead wires Specs: Dimensions: 6" lo...
More Information >Work Lights Specs:
Features:
...50 times longer More efficient - provide brighter light with less power output No bulbs to replace - no brittle filaments Polycarbonate lens and housing White LEDs with frosted lens Mounts on surface...
More Information >LED Strip Lights Specs:
Features:
...power, the light won't drain your battery or overload your circuits. Surface-Mount, Bolt-On Installation This surface-mount light replaces an existing light or adds a new light for your RV, cam...
More Information >Trailer Lights Specs:
Features:
...Microprisms per square inch for superior reflective power Durable construction is fully sealed and won't rip or tear Surface mount to trailer with pressure-sensitive adhesive backing Works on cur...
More Information >Trailer Lights Specs:
RV Exterior Lights Specs:
Features:
...lens covers incandescent bulb Compatible with 12V DC systems Surface mount installation - hardware not included 2-Wire design includes power lead and ground wire UL and CSA certified Specs: Dimensions...
More Information >Work Lights Specs:
Features:
...sealed, waterproof housing and lens unit is submersible Durable surface-mount technology (SMT) construction of LED circuit board Better withstands shock and vibration Allows for improved heat distribution...
More Information >Trailer Lights Specs:
Features:
...times longer More efficient - provide brighter light with less power output No bulbs to replace - no brittle filaments Polycarbonate lens and housing Clear lens Requires mounting bracket or grommet (sold...
More Information >Work Lights Specs:
Features:
...and lens Surface mounts to trailer - hardware not included 2-Wire design with 0.180 female barrels includes power lead and ground wire Specs: Overall dimensions: 2-1/2" long x 1-1/16&quo...
More Information >Trailer Lights Specs:
Features:
...Microprisms per square inch for superior reflective power Durable construction is fully sealed and won't rip or tear Surface mount to trailer with pressure-sensitive adhesive backing Works on cur...
More Information >Work Lights Specs:
Features:
...and lens Surface mounts with mounting bracket (sold separately) Mounts on 3" centers Accepts industry standard 1-prong or 2-prong plug (sold separately) Specs: Overall dimensions: 4&quo...
More Information >Trailer Lights Specs:
Features:
...Light angles down to illuminate your trailer's license plate Sonically sealed, chrome polycarbonate housing and lens are waterproof Durable surface-mount technology (SMT) construc...
More Information >Trailer Lights Specs:
Features:
...Trailer reflector increases visibility of vehicle at night and in low lighting Chrome bezel provides a finished look Surface mount to trailer with adhesive backing Meets FMVSS 108 standards...
More Information >Trailer Lights Specs:
Features:
...Red trailer reflector meets FMVSS requirements for reflex reflector Durable acrylic construction Self adhesive backing allows for easy stick-on application Screw holes allow for surface
More Information >
Trailer Lights Specs:
Features:
...Durable polycarbonate lens and housing Clear lens over incandescent bulbs Compatible with 12V DC systems Mounts on surface of trailer with bracket (154-09K - sold separately) Accepts industry standard...
More Information >Work Lights Specs:
Features:
...stainless steel base Clear snap-on lens over incandescent bulb Compatible with 12V DC systems Stud mount to trailer with included stud Single wire design grounds through mounting hardware Specs: Dimensions...
More Information >Trailer Lights Specs:
Features:
...Amber trailer reflector meets FMVSS requirements for reflex reflector Durable acrylic construction Self adhesive backing allows for easy stick-on application Screw holes allow for surface
More Information >
Trailer Lights Specs:
Features:
...Round amber trailer reflector enhances visibility on the road Durable acrylic construction Surface mount with a single screw (not included) Meets FMVSS "A" when properly...
More Information >RV Exterior Lights Specs:
Features:
...lens covers incandescent bulb Compatible with 12V DC systems Surface mount installation - hardware not included 2-Wire design includes power lead and ground wire UL and CSA certified Specs: Dimensions...
More Information >Trailer Lights Specs:
Features:
...Round red trailer reflector enhances visibility on the road Durable acrylic construction Surface mount with a single screw (not included) Meets FMVSS "A" when properly...
More Information >Trailer Lights Specs:
Features:
...Low-profile reflector increases visibility of vehicle at night and in low lighting Durable aluminum housing is rustproof Surface mount to trailer - hardware not included Made in the USA...
More Information >Trailer Lights Specs:
Features:
...Amber trailer reflector meets FMVSS requirements for reflex reflector when properly mounted Durable acrylic construction Adhesive backing allows for easy stick-on application Specs...
More Information >Trailer Lights Specs:
Features:
...systems Surface mount to trailer with mounting bracket - hardware not included 2-Wire design with power and ground wire DOT compliant Specs: Dimensions: 8-5/8" Long x 3-1/4" wide ...
More Information >RV Exterior Lights Specs:
Features:
...Amber lens over white LEDs Mounts on surface of RV - hardware included 2-wire pigtail includes ground and lead wires Specs: Dimensions: 6" long x 3-1/2" tall x 2" deep Di...
More Information >Trailer Lights Specs:
RV Exterior Lights Specs:
Features:
...9-3/4" tall x 3-1/2" wide x 2-1/4" deep Power draw: 0.87 amps at 12 volts Installation: surface mount 3-Year lim...
More Information >Trailer Lights Specs:
Features:
...Limited 1-year warranty Surface-Mount Light Surface-mount trailer lights install using a flange or bracket with mounting holes. These lights lay flat against the trailer surface and only require a small...
More Information >Trailer Lights Specs:
Features:
...Round amber trailer reflector enhances visibility on the road Durable acrylic construction Surface mounts with adhesive backing Meets FMVSS "A" when properly app...
More Information >Trailer Lights Specs:
Features:
...Red Reflector 1" x 12" Adhesive backing 2 Mount holes measure 7-7/8" apart Mee...
More Information >RV Exterior Lights Specs:
Features:
...plastic housing resists corrosion Snap-on amber lens covers incandescent bulb Compatible with 12V DC systems Surface mount installation - hardware not included 2-Wire design includes power lead and ground...
More Information >Trailer Lights Specs:
Features:
3-3/16" Diameter. Yellow trailer reflector enhances visibility on the road. Durable acrylic construction. Self-adhesive backing allows for stick-on application. Meets FMVSS requirements.
More Information >Trailer Lights Specs:
Features:
...Round red trailer reflector enhances visibility on the road Durable acrylic construction Surface mounts with adhesive backing Meets FMVSS "A" when properly app...
More Information >Trailer Lights Specs:
Features:
...Gray-coated license-plate light Surface mount Mounting hardware and adhesive not included Single-wire design Replaceable bulb Uses replaceable bulb #168 2-5/8" Long...
More Information >Trailer Lights Specs:
Features:
...span>mounting holes (center on center): 1-3/4" Bulb type: 168 Power draw at 12V: 0.35 amps Limited 1-year warranty Surface-Mount Light Surface-mount trailer lights install using a flange or brac...
More Information >Trailer Lights Specs:
Features:
...The bulb is protected in the housing and can be easily replaced. The base surface mounts on 2" centers. The light contains a single lead wire for power and is grounded through the mounting hardw...
More Information >Trailer Lights Specs:
Features:
...Microprisms per square inch for superior reflective power Surface mount to trailer with pressure-sensitive adhesive backing Works on curved and flat surfaces DOT compliant Made in the USA Dimensions...
More Information >Trailer Lights Specs:
Features:
...Low-profile reflector increases visibility of vehicle at night and in low lighting Durable aluminum housing is rustproof Surface mount to trailer - hardware not included Made in the USA...
More Information >Trailer Lights Specs:
Features:
...2-3/16" Diameter, round reflector Acrylic lens Surface mount Self-adhesive Red...
More Information >Trailer Lights Specs:
Features:
...Microprisms per square inch for superior reflective power Surface mount to trailer with pressure-sensitive adhesive backing Works on curved and flat surfaces DOT compliant Made in the USA Dimensions...
More Information >RV Exterior Lights Specs:
Features:
...deep Light output: 1221 lumens Diodes: 39 Wire length: 5" 1-Year limited warranty Surface-Mount Light Surface-mount RV lights install using pre-drilled mounting holes in the housing. These li...
More Information >Trailer Lights Specs:
Features:
...Round red trailer reflector enhances visibility on the road Durable acrylic construction Surface mount with a single screw (not included) Meets FMVSS "A" when properly...
More Information >Trailer Lights Specs:
Features:
3-3/16" x 1-7/16" Rectangle. Amber trailer reflector meets FMVSS requirements for reflex reflector. Durable acrylic construction. Self-adhesive backing allows for stick-on application.
More Information >Trailer Lights Specs:
Features:
...Round amber trailer reflector enhances visibility on the road Durable acrylic construction Surface mount with a single screw (not included) Meets FMVSS "A" when properly...
More Information >Trailer Lights Specs:
Features:
...replaced Durable chrome-plated brass construction Clear lens over incandescent bulb Compatible with 12V DC systems Snap-in mounting - light easily clips into 1-1/4" diameter mounting hole Single ...
More Information >Work Lights Specs:
Features:
...is submersible Durable surface-mount technology (SMT) construction of LED circuit board Better withstands shock and vibration Allows for improved heat distribution LEDs make great replacements for incandescent...
More Information >Trailer Lights Specs:
Features:
...Compatible with 12V DC systems Stud mount to trailer - hardware not included Single wire design grounds through mounting hardware Specs: Dimensions: 4" long x 1-3/4" wide x 2-5/...
More Information >Trailer Lights Specs:
Features:
...Light angles down to illuminate your trailer's license plate Durable surface-mount technology (SMT) construction of LED circuit board Better withstands shock and vibration Al...
More Information >LED Strip Lights Specs:
Features:
...Flexible LED strip provides light inside or outside your RV Warm white light with light starkness Compatible with Thule mounting rail TH306777 60-70 power LEDs per 3' Power consump...
More Information >Trailer Lights Specs:
Features:
...or curved surfaces Made in the USA Specs: Dimensions: 150' Long x 2" wide Candlepower: 1,000 Limited lifetime w...
More Information >Videos
for RV Exterior Lights
Help Articles
for RV Exterior Lights
Expert Answers
for RV Exterior Lights
A 16 inch tire will not fit on a 16.5 inch wheel. You would either need to get new 16 inch wheels with the proper bolt pattern to match what the hubs require or to get your existing wheels you would need to go with 16.5 inch tires. You mentioned…
view full answer...Based on my research, the Trailer Hub and Drum Assembly - 8,000-lb E-Z Lube Axles #AKHD-865-8-EZ-K will be a replacement for the 90865 Rockwell hub and drum. Both of these hub and drum assemblies are…
view full answer...National seal 472920 has an inner diameter of 2.25 inches and outer diameter of 3.375. For a replacement, you will want Grease Seal - Double Lip #GS-2250DL or oil seal #10-63.
view full answer...Thank you for purchasing from etrailer! You did a great job selecting compatible parts. When using Leaf Springs #e64SR with the #AP233 Equalizer Kit and the #H248 Hanger Kit, there should be…
view full answer...If your current springs have 5 leaves then going to a 7 leaf spring will increase the height of the trailer a little and make the trailer more susceptible to sway. Regarding capacity if you go with springs rated higher than what is required it will…
view full answer...The first thing to do is disconnect the trailer from the Liberty. Then using a circuit tester, like part #PTW2993, test each pin of the 4-Way. Clip the alligator clip of the circuit tester to the exposed post, the ground wire. Check each pin with…
view full answer...The correct replacement for a Demco Master Cylinder 05680-C is the Replacement Master Cylinder part #5650. I spoke with Demco to confirm this for you.
view full answer...I agree it is the right time to upgrade to a Lithium charger/converter as not all are Lithium compatible. I recommend using the Progressive Dynamics Mighty Mini AC/DC Panel and Converter/Smart Charger - 60 Amp #PD4060K which is a replacement for…
view full answer...The Bolt hitch lock part #BL7023582 that you referenced does fit your 2014 GMC Sierra 1500. I attached a chart that has all of the vehicle this works with. I also attached a link to a review video for this lock for you to check out as well.
view full answer...Yes, the Bolt Trailer Hitch Lock part #BL7023582 will work for you as it is a hitch lock designed for 2-1/2 inch hitches like what you have on your GMC 3500 truck. The usable portion of this lock is 3.55 inches. Check out the picture I attached for…
view full answer...I checked directly with BOLT for you, and they confirmed for me that your 2021 Chevy Silverado is absolutely compatible with their trailer hitch locks. Take a look at the accompanying photo, and if you have the same center cut key, the correct lock…
view full answer...The Dexter 10K electric brakes #23-439 (right side) and #23-438 (left side) will have to be manually adjusted using the adjustment wheel below the magnet. To adjust the brakes you will use a small screwdriver or similar tool to turn the adjustment…
view full answer...Filter Products (246)
Contact and Help
What our customers are saying:
I like the easy of navigation through the site. It only took me a couple of minutes to place my order. Thank You I will shop this sight again in the future.
Kevin
Manchester, MD