RV Covers Specs:
Features:
Throw this storage cover over your Class C motorhome to protect it from rain and snow while you're storing it in between camping trips. Cover wraps around the bottom corners of your RV and secures with straps so it won't flap in the wind.
More Information >RV Covers Specs:
Features:
Throw this storage cover over your Class C motorhome to protect it from rain and snow while you're storing it in between camping trips. Cover wraps around the bottom corners of your RV and secures with straps so it won't flap in the wind.
More Information >RV Covers Specs:
Features:
Throw this storage cover over your Class C motorhome to protect it from rain and snow while you're storing it in between camping trips. Cover wraps around the bottom corners of your RV and secures with straps so it won't flap in the wind.
More Information >Videos
for RV Covers
Help Articles
for RV Covers
Expert Answers
for RV Covers
Hey David, from previous customers of ours who have the same 2020 Keystone Raptor 424 we have determined that your pin box style is the Lippert 1621 which means for a Gen-Y gooseneck adapter you'd want…
view full answer...Below is the general process for bleeding an electric over hydraulic brake actuator like #K71-650. Fill reservoir with NEW brake fluid. Never re-use brake fluid that has been salvaged or removed from another system. Remove the key from the…
view full answer...Assuming your Sprinter has the factory tow package with the 7-way at the rear bumper, in addition to the #RED24FR Redarc Tow-Pro Liberty Brake Controller, you'll also need the #3063-P wiring harness and…
view full answer...The part you referenced 127194TB is a double-lip seal with an inner diameter of 1.274-inches and an outer diameter of 1.983-inches. The available seal nearest to those dimensions that we offer is part #RG06-010, which is a double-lip seal sold as a…
view full answer...When measuring for a trailer cover you want to measure from the front of the trailer box, not the tongue, to the rear including anything that is attached to the rear. This will include a spare or a ladder at the farthest edge at the rear of the…
view full answer...I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and…
view full answer...I agree it is the right time to upgrade to a Lithium charger/converter as not all are Lithium compatible. I recommend using the Progressive Dynamics Mighty Mini AC/DC Panel and Converter/Smart Charger - 60 Amp #PD4060K which is a replacement for…
view full answer...You are correct that this refrigerator does not have an ON/OFF switch or function. The best you can do is "Standby" that draws an unknown amount of power. One option is…
view full answer...If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…
view full answer...I spoke with my contact at Pollak and he stated that the Pollak Replacement 7-Pole, RV-Style Trailer Connector Socket, #PK11893-11933 is the correct replacement part for the Pollak PA66-MD40 that you have.
view full answer...If you are just looking for a new converter, the Replacement Converter for Parallax/Magnetek or WFCO RV Power Centers part #PD4635V will be a direct upgrade for the Magnetek Converter Series 6300 Model 6332 that you have now.
view full answer...I have found a hub for you. The Trailer Hub Assembly, #DX22XR, has a 5 on 4-1/2 bolt pattern and uses the LM11949 bearing on the outside. The inner bearing is a LM67048 and has an inside diameter of 1-1/4 inches. This hub is rated for 2,500 lbs…
view full answer...