1986 Chevrolet S-10 Pickup Radiator Fan

Hey Anthony, do you have a cam lock currently? Like on the outside all you see is a lock core and on inside there's a little arm that grabs the inside of the door? Or is there a cut out already? Either way you could use a slam latch like the part…

Hey Mark, I found a couple articles online that said it should be possible by just making some holes bigger but I was not able to find a walk through or guide on exactly what to do. I would think a mounting plate style lock like the part #GL34FR…

Hey Timothy, I reached out to my contact at Thetford and they said you need one of the following parts: - 42067 KIT, PEDAL HIGH WHITE STYLE II - 42078 KIT PEDAL LOW WHITE STYLE II These are made to order so you'll have to get it through them…

Electric fans do improve fuel mileage and power since they allow the accessory belt drive to turn with less resistance. I did the same conversion on an older Camaro years ago and it cooled better, improved mileage, and power. You'll have to…

Hey Trent, from what I found your 1995 Jeep Grand Cherokee uses an 18 inch diameter clutch fan like the part #D17118. The part number you referenced is 17 inches so it wouldn't work but I would recommend measuring to verify this.

Hi Phil; the Deluxe Compartment Door Key Lock #37200155 does not have a keyed alike option so you would have different keys for each lock. What you can use instead is the Replacement Cam Lock for RVs #BA56FR which can be keyed alike. Make sure you…

The Flex-a-lite 15" Black Magic Xtreme S-blade Fan w/ Thermostat Controller - 24V - Reversible #FLX18024 is sold as a fan assembly with motor and thermostat, but does not come with any mounting hardware as the installation will vary across…

From the images you attached, it appears you have what is typically used as a baggage/storage door latch. Because our entry door latches are designed for common RV door thickness of greater than 1", I suggest the Global Link Locking Baggage Lock…

The latch piece on the back of the Bauer Products RV Baggage Door Slam Latch #BA57FR is fixed in place. If you have experience with modifying things then you might be able to shift some stuff around but it's not something that you can simply pop…

I do not currently have an electronic version of installation instructions available to forward to you for the Bauer Products RV Baggage Door Slam Latch, #BA57FR. However, please note the linked product review and installation videos. The…

Hey Scott, The Global Link Locking Baggage Lock Actuator Set with Mounting Plate #GL34FR requires a cutout hole measuring approximately 3.75" x 3.75" and a door thickness of 0.7" to 1.25" thick. Overall it's 5" wide x…

Please note the attached image of the Bauer Products RV Baggage Door Slam Latch, #BA57FR. If you think you may have ordered the incorrect item, please forward an image of what you have and measurements. This part is specifically made to replace the…