Replacement Trailer Hubs For Spindle That Uses 1-1/4" Inner Bearing and 3/4" Outer Bearing
Question:
I have a spindle that is 3/4 inch outer and 1 1/4 inch inner. Seems pretty old. Is there a hub that would work?
asked by: Jeff
Expert Reply:
The Agricultural Trailer Hub Assembly # AH15450ECOMP is what you are looking for. It uses a Inner Bearing # LM67048 which has an inner diameter of 1.250" and an Outer Bearing # LM11949 with an inner diameter of .750". You can verify that the Grease Seal # SL150 with the inner diameter of 1.500" matches your spindle.
I did notice that there is a lot of scratches on your spindle. If these are deep grooves that your fingernail will catch on you should replace your Spindles # TRU54FR so that the the bearings and grease seals will fit properly and not become easily damaged.
(click to enlarge)
(click to enlarge)
Products Referenced in This Question
Replacement Trailer Hub Bearing - LM11949
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- .750 Inch I.D.
- Bearing LM11949
- Race LM11910
- 3000 lbs Axle
- etrailer
more information >
Replacement Trailer Hub Bearing - LM67048
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.250 Inch I.D.
- Bearing LM67048
- Race LM67010
- 5000 lbs Axle
- 6000 lbs Axle
- etrailer
more information >
- Trailer Bearings Races Seals Caps
- Seals
- Grease Seals - Single Lip
- 1.500 Inch I.D.
- 2.332 Inch O.D.
- Redline
more information >
Agricultural Spindle for 3,000-lb Trailer Axles - 1-5/8" Diameter
- Trailer Spindles
- Agricultural Spindle
- 1-5/8 Inch Diameter
- Round
- For 3000 lb Axle
- TruRyde
more information >
Product Page this Question was Asked From
Trailer Hub Assembly - 3,000 lbs Axles - 4 on 5 - Agricultural
- Trailer Hubs and Drums
- Hub
- Agricultural
- LM67048 / LM11949
- Standard Grade
- For 3000 lbs Axles
- 1/2 Inch Stud
- 4 on 5 Inch
- TruRyde
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Dexter Trailer Idler Hub Assembly for 2,500-lb Axles - 5 on 4-1/2
- Q&A: Replacement Hub/Drum Assembly Needed For A Older Boat Trailer
- Search Results: 3/4 inch axle hub
- Shop: Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 4-1/2 - Galvanized
- Q&A: Trailer Hub That Fits a Spindle With 1-1/4" Inner Bearing and 3/4" Outer Bearing
- Shop: Trailer Hub Assembly - 2,200-lb E-Z Lube Axle - 5 on 4-1/2 - 13" - 15" Wheels - Galvanized
- Q&A: Recommended Trailer Hub with 1-1/4 Diameter Inner Bearing and 3/4 Diameter Outer Bearing
- Q&A: Trailer Hub That Uses Bearings LM11949 and LM67048
- Search Results: 2500 lb trailer axle
- Search Results: dx22xr
- Search Results: trailer brake kits
- Shop: Dexter Trailer Hub & Drum Assembly for 3,500-lb Axles - 10" Diameter - 5 on 4-1/2 - Pre-Greased
- Shop: Dexter Electric Trailer Brakes - 10" - Left/Right Hand Assemblies - 3.5K
- Shop: #84 E-Z Lube Spindle w/ Brake Flange for 3,500-lb Trailer Axle - 1-3/4" Diameter
- Shop: Agricultural Spindle for 3,000-lb Trailer Axles - 1-5/8" Diameter
- Q&A: Hub for E-Z Lube Spindle on Boat Trailer
- Q&A: Trailer Hub Availability that Uses Bearing Numbers LM67048 and LM11949
- Search Results: spindle
- Q&A: Removing and Replacing Trailer Spindles
- Search Results: trailer hubs and drums
- Search Results: hub and spindle
- Shop: RV Bearing
- Video: Spindle Grease Seal Set for L44643 Inner Bearing and 1.980 Bearing Buddy Spec Review