Will Curt SecureLatch Pintle Hook Bolt to Standard Plates

Question

Question:

What is the bolt hole spacing on this hitch? It says it needs to be used with Curts slotted securelatch mount. Can it be bolted to a standard 3-3/8inch x 1-3/4inch hitch plate?

asked by: Matt

0

Expert Reply:

The Curt SecureLatch Pintle Hook with 2-5/16" Ball - Bolt On - 20,000 lbs # CU97FR will bolt onto a regular plate like you mentioned. The dimensions you mentioned for the bolt pattern of 3-3/8 inch x 1-3/4 inch are perfectly compatible with this.

expert reply by: Jameson C

0

Answer 1

The Curt Pintle Hook - Bolt On - 10,000 pounds #C48205 will work with The Curt Pintle Hook Mounting Plate for 2 inch Hitches - 6 inch Shank - 8 Hole - 17,000 pounds #C48343. It will not work with The B & W plate #BWPMHD14002 because it…

view full answer...

Answer 2

I recommend pairing the Curt SecureLatch Adjustable Pintle Mounting Plate #C96BR with the Curt SecureLatch Pintle Hook with 2-5/16" Ball #CU97FR so you get the most versatility out of your setup. If you don't already have a hitch pin for…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 6

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 7

Hello Todd. Yes, there is a 1-7/8" ball available for the Weigh Safe Hitch w/ Built-In Scale #WS88RR. For that, you can use the following: Replacement 1-7/8" Hitch Ball for Weigh Safe Ball Mounts - Stainless Steel - 7,500 lbs #WS66KR Leave…

view full answer...

Answer 8

Hello Anthony, Since your 2016 Ford F-250 Super Duty has the standard size bed 6.7' you are going to want a sliding hitch to ensure that you have the clearance on those sharp turns, no one wants to ruin their vacation by taking out the cab of…

view full answer...

Answer 9

Hey JC, thanks for reaching out! The B&W Tow & Stow 2-Ball Mount #BWTS20066BMP is definitely compatible with the MultiPro tailgate on your 2024 GMC Sierra 2500, but the only one available to fit exactly with a 2-1/2" hitch receiver is…

view full answer...

Answer 10

Hey JD, The Weigh Safe Hitch w/ Built-In Scale for 2.5" Hitch #WS88RR uses hitch pic lock #WS54CR, which has a shear strength capacity of 45,000lbs according to Weigh Safe.

view full answer...

Answer 11

Your 2024 Chevrolet Silverado 3500 will come with a 2-1/2" trailer hitch receiver. If your truck did not come with a reducer for a 2" receiver we do have the B&W #BWRHXA2182 if you need to use your 2" ball mount or hitch mounted…

view full answer...

Answer 12

Hi David; the good news is the EcoHitch Hidden Trailer Hitch Receiver #EH92KR does fit the hybrid model of the 2025 Kia Carnival. This has a concealed cross tube so you won't lose a lot of clearance and a bolt-on installation. If you're…

view full answer...

Will Curt SecureLatch Pintle Hook Bolt to Standard Plates

Product Page this Question was Asked From

Continue Researching