Eliminating Trailer Bounce When Towing And Using Weight Distribution System
Updated 05/04/2017 | Published 05/03/2017
Question:
I have a 30ft Keystone Travel Trailer dry weight 6150lbs GVWR is 7780lbs tounge weight 620 to 780. Im towing it with a 2015 Chevy Silverado 1500 5.3 V8 with a 3:42 gear ratio. We left the RV dealership last week and noticed a little bounce in the rear of the tow vehicle. My question is the dealer put a Curt Trutrack weight distribution system on Model# c17501 15000lbs wasnt sure if that weight distribution setup was to ridged for the trailer?
asked by: Mike B
Helpful Expert Reply:
Normally, the tongue weight should be somewhere between 10 and 15 percent of the loaded trailer weight. For your trailer it would mean somewhere between 780 and 1200-lbs.
The # C17501 system is designed for tongue weight between 1,000 and 1,500-lbs so it may be a little bigger than you really need. You can try shifting some weight in the trailer forward to add some tongue weight and that would help eliminate some of the bounce you are experiencing.
Also, make sure you are towing it as level as possible. You may need a different ball mount. I have attached a link to a helpful article that explains how to choose the right ball mount.
Product Page this Question was Asked From
Curt TruTrack Weight Distribution System w/ Sway Control - Trunnion - 15,000 lbs GTW, 1,500 lbs TW
- Weight Distribution Hitch
- WD With Sway Control
- Trunnion Bar
- Fits 3 Inch Frame
- Fits 4 Inch Frame
- Fits 5 Inch Frame
- Fits 6 Inch Frame
- Includes Shank
- Top-Mount
- Fits 2 Inch Hitch
- Allows Backing Up
- 1100 lbs
- 1200 lbs
- 1300 lbs
- 1400 lbs
- CURT
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Search Results: hitch lock
- Shop: Suspension Enhancement
- Shop: Timbren Rear Suspension Enhancement System
- Article: 5 Tips to Confidently Choose Your Weight Distribution Hitch
- Video: Detailed Breakdown of the InfiniteRule Hitch Lock for 2" Hitches
- Shop: Malone Anti-Rattle HitchLock System
- Shop: Timbren Rear Suspension Enhancement System
- Shop: Suspension Kit for Tandem-Axle Trailers - 1-3/4" Wide Double Eye Springs - 2-1/4" Links
- Shop: SumoSprings Solo Custom Helper Springs - Front Axle
- Shop: Curt Pintle Hook with 2-5/16" Ball - 2-1/2" Hitches - 20,000 lbs
- Shop: Master Lock Trailer Coupler Lock - 1-7/8", 2" and 2-5/16" Ball Couplers
- Search Results: 17501
- Q&A: Experiencing Bounce When Towing 24 FT Pull Behind Trailer w/ 2014 Chevrolet Silverado 1500
- Search Results: k71~697~00
- Search Results: smartplug ethernet
- Search Results: curt weight distribution hitch
- Search Results: curt weight distribution shank
- Search Results: tongue weight scale
- Q&A: How Can I Reduce Bouncing On A Bumper Pull Trailer
- Article: Best Air Bag Suspension (2023)
- Video: Trailer Hitch Anti-Rattle Kit for 1-1/4" Trailer Hitches: The Breakdown
- Q&A: Troubleshooting Trailer Bounce on a Triple Axle Trailer
- Video: MORryde StepAbove RV Steps for 23-3/4" to 26-1/4" Wide Doorways Review
- Q&A: Best Way to Prevent Sagging Suspension When Towing a Trailer
- Q&A: Operating Pressure and Temperature for Travel Trailer Tires
- Article: Which Sway Control Hitch is Right For Your Trailer?
- Q&A: What Would Cause Bouncy Ride Quality When Towing Trailer with Weight Distribution System
- Q&A: Correct SumoSprings Solo Custom Helper Springs for a Travel Trailer
- Article: Determining Trailer Tongue Weight
- Video: Timbren Rear Suspension Enhancement System Review
on Weight Distribution Hitch
