215/60-8 Tire and Wheel Recommendation with a 4 on 4 inch Bolt Pattern
Updated 11/19/2014 | Published 11/18/2014 >
Question:
I need a tire 215/60 - 8 and wheel 4x4 with a negative offset, do you have any / thanks
asked by: Tim Q
0
Expert Reply:
I have a wheel and tire that is very close to what you are looking for, except it doesn't have a negative offset.
The Kenda Trailer Tire with 8" Galvanized Wheel # AM3H300 has a 215/60-8 size tire and a wheel with a 4 on 4 inch bolt pattern. Only issue is that it has a 0 offset. It would be possible for you to use wheel spacers to give you the negative offset you need.
expert reply by:
Jameson C
0
Product Page this Question was Asked From
Kenda 215/60-8 Bias Trailer Tire with 8" Galvanized Wheel - 4 on 4 - Load Range C
- Trailer Tires and Wheels
- Tire with Wheel
- Bias Ply Tire
- Load Range C
- 215/60-8
- 8 Inch
- M - 81 mph
- 4 on 4 Inch
- Steel Wheels - Galvanized
- Kenda
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Q&A: What is the Offset and Backspacing of Dexstar 8x7 Inch Trailer Wheel with 4 on 4 Bolt Pattern
- Q&A: Can 18.5 x 8.5 - 8 Tires be Replaced with 215/60-8 Tires
- Q&A: How Much Offset Does the Kenda 215/60-8 Bias Trailer Tire Have?
- Q&A: Can 20.5x8.5-10 Trailer Tires be Used in Place of 18.5x8.5-8 Tires on Snowmobile Trailer
- Q&A: Measuring for Replacement Axles, Bearings, and Leaf Springs for 1976 Dilly Boat Trailer
- Q&A: Replacement Bearing/Seals for Hubs With 1 Inch Spindle
- Q&A: Replacement Grease Seal for Dexter Axle 69-46
- Article: How to Fix a Bad Trailer Ground
- Article: How to Raise Your Travel Trailer Height
- Article: How to Accurately Measure Trailer Leaf Springs
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Article: How to Level Your Fifth Wheel in 3 Simple Steps (Manual or Auto-Level)
- Article: Trailer Lighting Requirements
- Article: How to Determine Tire/Wheel Diameter


