Leaf Spring and U-Bolts Recommendation for a Utility Trailer with 2 inch Square Axles

Published 11/14/2014

Products Featured in This Question

6-Leaf Double-Eye Spring for 4,500-lb Trailer Axles - 26" Long

(2379)

$71.28

U-Bolt Plate for 2" Square Axle - 1-3/4", 2" Springs - 9/16" Bolts

(287)

$15.39

2" Square Trailer U-Bolt (Qty 2)

(699)

$27.69

Question:

Hello: Im replacing the springs and u bolts on my old utility trailer. A dimension is 26 1/4, B dimension is 13 1/8, C dimension is 3. However, the axle diameter is 2. What do you have that will fit? Thanks,

asked by: Lee W

Expert Reply:

Sounds like you have 2 inch square axles on your trailer, for a set of U-bolt you would want part # SP01-160 and then for a U-bolt plate you would want the part # 117594.

Now to pick out the correct springs you will want to first find out how much capacity your trailer and axles are rated for. This should be stamped on a plate near the coupler where the VIN is located. If it was a round axle I could give you a pretty good ball park of what the capacity would be, but square axles don't have the standardization.

With that being said the spring that would most closely match yours based on dimensions would be the part # e27SR.

expert reply by: Jameson C