What is the Thread Pitch for Trailer Hub Wheel Stud Part # RG03-060
Published 11/07/2014
Question:
What is the thread pitch for the stud RG03-060
asked by: Chuck
0
Expert Reply:
The threaded pitch of trailer hub wheel stud # RG03-060 is 20 threads per inch and the diameter is 1/2-inch. See diagram to the right.
expert reply by:
Chris B
0
click to enlarge
Product Page this Question was Asked From
Replacement Trailer Hub Wheel Stud, Drive-In, 1/2" x 1-7/8" (Qty 4)
- Accessories and Parts
- Boat Trailer Wheels
- Trailer Hubs and Drums
- Trailer Tires and Wheels
- Wheel Studs
- 1/2 Inch Diameter
- Drive-In Stud
- 1-7/8 Inch Long
- Redline
more information >
Continue Researching
- Shop: Dexter Wheel Bolt - 1/2" Diameter - 2-11/16" Long - Qty 1
- Shop: Replacement Trailer Hub Wheel Stud, Drive-In, 1/2" x 1-7/8" (Qty 4)
- Shop: Replacement Mounting Stud for Dexter 5 on 4-1/2 Hub and Drum for Hydraulic Brakes
- Q&A: Bearing Kit that Fits 2023 Grand Design 390rk with 8k Axles
- Q&A: Replacement Wheel Stud that is .545 Diameter and 1/2 - 20
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Q&A: Do You Have a Video on How to Replace the Spring for the etrailer Square Direct Weld Jack e66FV
- Q&A: How To Measure For Replacement Overhead Springs On A Trailer Door
- Q&A: Replacement Bronze Bushings for MoRryde CRE3000 Suspension System
- Q&A: Is the Mopar 82216418AA Wiring Harness Required for Flat Towing 2022 Dodge Durango R/T
- Q&A: Comparing the Roadmaster Direct-Connect and Crossbar-Style Base Plate Kits
- Article: Trailer Maintenance Schedule
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: Trailer Lighting Requirements
- Article: Most Popular Wheel Bearings
- Article: 7 Common Questions Everyone Has About Trailer Tires