Max PSI For the Kodiak Disc Brake Kit # K2HR712 Before Seal Failure
Published 10/21/2014
Question:
What is the max PSI for the master cylinder and the seal in the caliper?
asked by: Eli H
0
Expert Reply:
I spoke to my contact at Kodiak and he said that anything over 1,600 psi will void the warranty of the Kodiak Disc Brake Kit # K2HR712 but most likely the seals in the caliper would give out at about 2,200 psi.
expert reply by:
Jameson C
0
Product Page this Question was Asked From
Kodiak Disc Brake Kit - 13" Hub/Rotor - 8 on 6-1/2 - Raw Finish - 7,000 lbs
- Accessories and Parts
- Trailer Brakes
- Disc Brakes
- LH
- RH
- 7000 lbs
- Brake Assembly
- 8 on 6-1/2
- Hub and Rotor Assembly
- Kodiak
more information >
Featured Help Information
Instructions
Continue Researching
- Shop: Kenda Karrier S-Trail ST145/R12 Radial Trailer Tire - Load Range E
- Shop: Kenda Karrier S-Trail ST145/R12 Radial Tire w/ 12" Galvanized Spoke Wheel - 5 on 4-1/2 - LR D
- Video: Hydrastar Brake Actuator HBA-CAM Review
- Q&A: Flexiride 2000 vs Timbren 2000 vs Timbren 2000 HD Suspension for Off Road Trailer
- Q&A: Can Regular Grease Trailer Hubs be Converted to Oil Bath Hubs
- Q&A: Do 10 Inch Kodiak Stainless Steel Disc Brakes Work With Oil Bath Hubs
- Q&A: Is There a Brake System For a 3,500LB Axle Which Will Allow For 10 Wheels?
- Q&A: Can 7 Inch Electric Trailer Brakes Be Used on a 3500 Pound Trailer Axle
- Q&A: Installing A Battery Isolator On The Trailer Side Of The Wiring Connection
- Q&A: Do Kodiak Disc Brake Kits Change Location of Wheel on Trailer Axle
- Shop: Dexter Disc Brake Assembly - 10" Hub/Rotor - 5 on 4-1/2 - Dacromet - 3,500 lbs
- Shop: Karrier ST175/80R13 Radial Trailer Tire with 13" Galvanized Wheel - 5 on 4-1/2 - Load Range D
- Shop: Kenda 5.70-8 Bias Trailer Tire with 8" White Wheel - 5 on 4-1/2 - Load Range C
- Shop: Kodiak Disc Brake Kit - 8" Rotor/Hub - 5 on 4-1/2 - Dacromet - 3,500 lbs
- Shop: Dexter Hydraulic Trailer Brakes - Uni-Servo - 7" - Left/Right - 2.5K