Looking for Replacement Hubs for Boat Trailer with 1.06 Inch Diameter Spindles
Updated 11/08/2014 | Published 10/17/2014
Products Featured in This Question
Question:
I need new hubs for my boat trailer. I don't know the bearing numbers, I can't read them. The spindle is right at 1.06 where the bearings would sit. I need a 5 on 4-1/2 bolt pattern to match my existing wheels.
asked by: Fred
Expert Reply:
Since you successfully measured your spindles, it sounds like you might have a digital caliper lying around somewhere. Measure the hub bore (inside diameter of hub where grease cap sits). If this diameter is 1.98 inches, your existing bearings are # L44649, in which case the # 8-258-5UC1 hub you referenced would indeed be a correct replacement.
Since the hubs are going on a boat trailer, I'd recommend you use galvanized hubs like part # 8-259-50UC1. The hubs are identical to the ones you asked about, but they have a galvanized finish that will provide more corrosion resistance. The hub includes replacement inner and outer bearings, races, grease seal, grease cap and lug nuts.
Product Page this Question was Asked From
Dexter Trailer Idler Hub Assembly for 2,200-lb Axles - 5 on 4-1/2
- Trailer Hubs and Drums
- Idler Hub
- Standard
- L44649 / L44649
- Standard Grade
- For 2000 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- Dexter
more information >
Continue Researching
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Video: Let’s Check Out the CE Smith Deep V Keel Roller Assembly for Boat Trailers
- Search Results: bt150a
- Search Results: short hub
- Shop: Trailer Idler Hub Assembly for 2,500-lb Axles - 5 on 4-1/2 - Qty 2
- Search Results: hub washer
- Search Results: 1250 inch id trailer bearings races seals caps
- Search Results: hub nut
- Shop: Dexter Trailer Idler Hub Assembly for 2,200-lb Axles - 5 on 4-1/2 - Galvanized
- Shop: Kenda 5.70-8 Bias Trailer Tire with 8" Galvanized Wheel - 5 on 4-1/2 - Load Range D
- Search Results: spare tire carrier
- Q&A: Recommended Hubs for a Snowmobile Trailer With 8 Inch Wheels
- Q&A: Replacement Hub and Spindle for 2014 Ranger Trailer
- Shop: Trailer Idler Hub Assembly for 2,000-lb Axles - 5 on 4-1/2 - Galvanized
- Search Results: 1500 lb axle
- Shop: Trailer Wiring
- Shop: Trailer Hitch
- Shop: Loadstar 5.70-8 Bias Trailer Tire with 8" Galvanized Wheel - 5 on 4-1/2 - Load Range C
- Shop: Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 5 on 4-1/2 - Galvanized
- Shop: CE Smith Trailer Axle w/ Idler Hubs - 5 on 4-1/2 - 57-1/2" Long - 1.8K
- Q&A: Replacement Hubs for a Triton 08351 PWC Trailer Axle
- Q&A: Replacement Normal Size Hub For BT150 Short Hub
- Q&A: Replacement Hub For Reliable Model BT-150A “short” Hub
- Q&A: Is There a Trailer Hub that Fits Spindle with 1.06 inch Bearing and 1.25 inch Grease Seal
- Q&A: Finding Replacement Axle For Jet Ski Trailer