Is There a Trailer Hub that Fits Spindle with 1.06 inch Bearing and 1.25 inch Grease Seal
Updated 10/27/2025 | Published 03/06/2025
Products Featured in This Question
Question:
My question: Will hub AKIHUB-545-2-EZ-2K work on my axle? If not, do you have one that will? I wish to purchase two new hubs and wheels. It appears that hub AKIHUB-545-2-EZ-2K meets my needs. However, it appears the inner diameter of the grease seal may be too large. I have included images of my current bearings, seal and axle plus measurments. Please help me find the best hub for my axle. Thanks, Steve
asked by: Steven
(click to enlarge)
(click to enlarge)
(click to enlarge)
Expert Reply:
Hey Steven, you do have a unique setup but we do have the CE Smith 2,700 lb axle hub part # CE13109 that matches the bearing and seal dimensions you have/need. This has a 4 on 4 inch wheel bolt pattern but if you need 5 on 4-1/2 inch you'd instead want the part # DX77UR. Thanks for all of your pictures!
Product Page this Question was Asked From
Easy Grease Trailer Idler Hub Assembly for 2K Axles - 10" to 12"- 5 on 4-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Idler Hub
- EZ Lube
- Pre-Greased
- L44649 / L44649
- Standard Grade
- For 2000 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 10 Inch Wheel
- 12 Inch Wheel
- etrailer
more information >
Continue Researching
- Search Results: idler hub
- Search Results: trailer hubs and drums
- Search Results: trailer brakes
- Search Results: redarc trailer brake controller
- Search Results: 2500 lb axle
- Shop: Dexter Trailer Idler Hub Assembly for 2,700-lb Axles - Pre-Greased - 5 on 4-1/2 - Galvanized
- Search Results: grease seal
- Search Results: bearing buddy trailer bearings races seals caps
- Shop: Brake Controller
- Shop: Lippert Spindle Nut Kit w/ D-Flat and Tang Washers - For 2,200-lb to 4,400-lb Axles
- Shop: Terran Industries Double Lip Grease Seal - I.D. 1.249" / O.D.1.983" for 2K to 2.5K Axles
- Shop: Easy Grease Trailer Idler Hub Assembly for 2K Axles - 5 on 4-1/2 - Galvanized
- Shop: Grease Seal - Double Lip - I.D. 1.249" / O.D. 1.983" - 2,000-lb to 2,200-lb Axles - Qty 1
- Shop: Dexter Electric Trailer Brakes - 7" - Left/Right Hand Assemblies - 2,000 lbs to 2,200 lbs
- Shop: Mounting Panel for Redarc Tow-Pro Trailer Brake Controller Control Knob
- Q&A: How to Find Which Trailer Brake Assembly Goes on the Left or Right Side of a Trailer
- Q&A: Options for Adding Electric Brakes to Trailer Axle without Brake Mounting Flanges
- Q&A: Proper Orientation of Trailer Electric Brake Assemblies
- Video: Install: Redarc Tow-Pro Liberty Brake Controller w/ Custom Harness on a 2022 Honda Ridgeline
- Video: Redarc Tow-Pro Liberty Brake Controller Review RED24FR
- Q&A: When To Replace Your Brake And Hub/Drum Assemblies And How To Handle Discoloration On The Spindle
- Q&A: What Is the Difference Between a BTR and BT8 Spindle
- Q&A: Recommended Bearing Kit for 1-1/16" BTR Spindle
- Q&A: Replacement Bearings for a Spindle that Measures 1.055 Inches
- Video: Hands-On with the Grease Seal
- Video: Replacement Trailer Hub Bearing Spec Review
- Video: Checking Out the Timken Grease Seal
- Video: Detailed Breakdown of the Double Lip Grease Seal
- Video: All About the Easy Grease Trailer Hub and Drum Assembly for 2K Axles
- Shop: Trailer Hitch
Jameson C.
10/27/2025
Hey Steve, how did things turn out with the CE Smith or Dexter hub options for your axle? Your update could make it easier for the next person trying to match their bearing and seal sizes.