Is Redline Trailer # 84 Spindle a Fit for Dexter 8-247 Drums
Updated 10/07/2014 | Published 10/06/2014 >
Products Featured in This Question
Question:
I have a set of Dexter 8-247 drums bearings and seals. I am looking for a spindle that I can weld into some 2inch sch80 pipe to make an axle. I think a #84 spindle is what Im looking for. Inner bearing # L68149 outer # L44649. Can you assist me in a product you may have?
asked by: John H
Expert Reply:
You are correct that the TruRyde #84 Spindle, like part # TRU24FR, which you reference, is a fit for your Dexter trailer hub and drum, part # 8-247-50. Please note the spindle has a 1750 lbs. capacity, so two spindles will give your axle a 3500 lbs. capacity.
I would strongly recommend you take the axle to a qualified machine shop to have the appropriate welds done.
Product Page this Question was Asked From
#84 Spindle for 3,500-lb Trailer Axles - 2" Diameter
- Trailer Spindles
- Standard Spindle
- Without Flange
- L68149
- 2 Inch Diameter
- Round
- For 3500 lb Axle
- TruRyde
more information >
Continue Researching
- Q&A: Will The Kodiak Disc Brake Kit K2R35DKG Fit The etrailer Hub AKIHUB-545-35-G-K?
- Q&A: What is a #84 Spindle and How Do I Know I Have One On My Trailer?
- Q&A: Reverse Lights for 2018 Ranger Bass Boat Trailer
- Q&A: Do Trailer Hubs for 5,200 lb and 6,000 lb Axles Use Different Bearings
- Q&A: Recommended Dexter Hub/Drum Assemblies for 5,200 lb and 6,000 lb Axles
- Q&A: Recommendation to Replace Holland 4800SL Gooseneck Jack with Electric Model
- Q&A: What Does the PL Error Code Mean on a Tekonsha P2 Trailer Brake Controller, 2004 Dodge Ram
- Article: Trailer Drum Brakes vs. Disc Brakes: Making the Decision
- Article: 7 Common Questions Everyone Has About Trailer Tires
- Article: Most Popular Wheel Bearings
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: Best Boat Trailer Tires
- Article: The 5 Best Trailer Drop Hitches You Can Buy
- Article: How to Bleed Your Trailer Surge Brakes

