What is the Lug Nut Torque Spec for 1/2 Inch Lug Nuts on a Dexter Trailer Axle
Updated 08/12/2014 | Published 08/10/2014
Question:
What is the recommended lug nut torque?
asked by: Tim
0
Expert Reply:
The hubs included with Dexter axle # 20440I-EZ-72 have 1/2 inch studs. For 1/2 inch you would torque the lug nuts down to 75 - 85 foot pounds.
expert reply by:
Michael H
0
Product Page this Question was Asked From
Dexter Trailer Axle w/ Idler Hubs - EZ-Lube - 4 on 4 Bolt Pattern - 72" Long - 2,000 lbs
- Trailer Axles
- Leaf Spring Suspension
- Standard Grade
- Idler Hubs
- 2000 lbs
- 4 on 4 Inch
- 58 Inch Spring Center
- 72 Inch Hub Face
- No Drop or Lift
- Dexter
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Search Results: rm690
- Video: An In-Depth Look at the Replacement 12V 5 Ah Battery for Bright Way Trailer Breakaway Kits
- Q&A: Could Bright Way Trailer Breakaway Kit # 3802339 Be Used to Power Interior Lights
- Q&A: Does Brightway ICU Trailer Breakaway Kit Come With Diodes
- Q&A: What Replacement Converter Do I Need for a Series 7300 Model 7345 Converter?
- Q&A: Looking for Replacement 5 Lug Hub with Bearings L44649 Pre Greased
- Q&A: Does It Matter If the Spring Center and Hub Face Is Different When Replacing A Trailer Axle
- Q&A: What Leaf Spring Should Be Used With 2,000 lb Axle?
- Q&A: Axle Flip Kit for a 1,000 Lb to 2,000 Lb Trailer Axle 1-3/4 Inch Diameter
- Article: How to Raise Your Travel Trailer Height
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: How to Measure a Trailer Axle
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Article: Best Vehicles to Flat Tow Behind an RV
- Article: How Does an RV Water Pump Work?
- Article: How to Measure Your Trailer Wheel Bolt Pattern