What Can I Use to Access My Trunk Without Having to Remove My Bike Rack from My Jeep?
Updated 11/20/2026 | Published 11/17/2026 >
Products Featured in This Question
Question:
I purchased the Hollywood Racks RV Rider Bike Rack for 2 Electric Bikes and installed it on my Jeep Wrangler. It seems to work and has clearance for the full spare on the back - which was a concern. However, I am trying to figure out if there is anyway to get access to my trunk w/o having to remove the entire rack. When I tilt it back, the full spare still hits the rack. Am I missing something or is the only way to get access to my trunk is by removing the enire rack each time?
asked by: Anthony N
Expert Reply:
Hi Anthony,
This is a common issue people run into when they have a spare tire, or the tilt of the bike rack doesn't allow enough access to get into their trunk. The best option in this situation is to get a swing away adapter like the Swagman Swivel Hitch Extender for 2" Hitches part # S86SR. It can be installed on the left or right and opens to swing the bike rack that's inside the adapter's receiver to the side, so you have full access to your trunk/rear hatch. I've linked a video showing how the hitch adatper works as well as a photo of it in use so you'll have an idea of how it functions.
The Swagman Swivel Hitch Extender can support up to 300lbs, which is necessary due to the weight of the electric bikes as some other swing away adapters can't hold that much weight. To make sure you're not exceeding your Jeep's tongue weight, you'll want to determine how much your e-bikes and current bike rack weight together with the additional 47lbs of weight that the adapter has. For a 2022 Jeep Wrangler, your tongue weight should be between 200 to 350lbs depending on the trim line of your Jeep and using the adapter will reduce this amount by 50%. If the tongue weight is exceeded, it can damage the frame of the Jeep, the hitch, and anything in the hitch at the time.
How often do you take your bikes out?

Jerry B.
11/19/2026
I’m not happy camper, I’ve found that it’s fine with a bike rack(about 100lb load) but upped load to about 200lbs for a trip this summer it began to seriously sag and required lifting about a1/2inch to close.. yes I pinned in the opened and closed position . I didn’t have an extreme lever arm, am planning on going to a welder and have the failing hinge reworked.. color me disappointed



Product Page this Question was Asked From
Swagman Swivel Hitch Extender - 2" Hitches - Dual Side - Swing-Away Hitch Adapter
- Hitch Adapter
- Swing-Away Hitch Adapter
- Bike Racks
- Fits 2 Inch Hitch
- 300 lbs
- Swagman
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Q&A: Which Swing Away for Bike Racks Would You Say is Beefier in Design the Kuat or Swagman?
- Q&A: Arm Dimensions for the Swagman Swivel Hitch Extender
- Q&A: High Low Adapter For Dirt Bike Carrier
- Q&A: Recommended Locking Hitch Pin Compatible w/ the Threads on the Swagman Swivel Hitch Extender
- Q&A: What is the Highest Capacity Swing-Away Hitch Extender?
- Q&A: Will Swing-Away Hitch Extender Hold Bike Rack With E-Bikes
- Q&A: Swing Away Bike Rack For Carrying 2 E-Bikes On A 2020 Winnebago Travato KL
- Article: How to Choose a Cargo Carrier That Will Clear a Rear Mounted Spare Tire or Bumper
- Article: 5 Things to Know About Weight Distribution Hitches
- Article: Hitch Mounted Cargo Carrier Information
- Article: Best Hitch Cargo Carriers
- Article: How to Choose the Right Trailer Hitch Class
- Article: 30-Amp and 50-Amp RV Service: What's the Difference?
- Article: Types of Trailer Hitches: How and Why to Use Each




Vic T.
11/19/2026
Anthony, I had the same problem with ebikes and my class B van, additionally my van had a rear cassette toilet which I could not access with the bike rack. I purchased the Swagman swingout hitch which solved my problem and worked great. The swing out hitch will reduce the weight capacity of your hitch so do the math, but I loved the quality and easy of use, the hitch worked great, Good luck, Vic