bing tracking image
Q & A Icon

Does Andersen Ultimate Allow Tight Turns with 2023 Montana High Country 331RL 2025 Dodge Ram 3500  

Updated 11/17/2026 | Published 11/13/2026

Question:

I have a 23 montana high country 331rl and a 25 dodge ram 3500 with puck system, Im using demco auto slider and Im happy with it but it weighs 300lb and Im thinking about this because of convenience of removing it, my concern is the 4in off set, if its enough to clear my cab? Did you hear of any issues with this and if it does hit am I screwed or can I install another off set ball on the bed of the truck?

0

Expert Reply:

Hey Greg, I looked up pictures of your 23 Montana High Country 331RL and it has a tapered nose and an extended pin box which is designed to help with short bed turning clearance so in my opinion you'd be able to use the Andersen Ultimate part # 3220 with it's 4 inch offset and you'd have the needed turning clearance. It's hard to give an exact answer as there are some unknowns but have you checked to see by how much clearance you have when making sharp turns?

expert reply by:
0
Jameson C
Tim profile picture

Tim

11/17/2026

Little different but I have a sierra 3660 5er and a 2026 ram with a short bed.....tons of clearance. I would imagine you'll have tons also. Overall I'm happy with the andersen and the light weight is fantastic. It has minor downsides but not enough to make me regret the purchase. Example....they tell you to torque the main bolt a 2nd time after hooking up but there's no easy way to get a torque wrench on that bolt after you're hooked up.

Jameson C. profile picture
Etrailer Expert

Jameson C.

11/17/2026

@Tim glad it's working well for you! That is an interesting point about torquing that bolt too haha.
Greg B. profile picture

Greg B.

11/17/2026

I have a 2024 GMC 3500 short bed pulling a Momentum 336 which is about 40’ long. I can’t do a 90 degree turn but close. I don’t like the fact that the location is behind the center of the axle but it doesn’t seam to effect the ride much. I like being able to remove it out of the bed of my truck myself. And with all the goose-neck options, I’ll stick with what works until I find one that I like. I’ve made a trip from southern Indiana to Florida and a few trips around here with no problems. So far, I’m very satisfied. I use plastic cans under the front jacks to keep the distance as short as possible to keep the swaying down to a minimum when parked.

Jameson C. profile picture
Etrailer Expert

Jameson C.

11/17/2026

@GregB Thanks for the feedback! That is really helpful!

Product Page this Question was Asked From


Q & A Icon

Continue Researching

See More Q&A Expert Answers >>