2-1/2" Shank Upgrade for Curt TruTrack 2P Weight Distribution System # C69JR
Updated 11/12/2026 | Published 11/06/2026 >
Products Featured in This Question
Question:
I have the Curt TruTrack 2P Weight Distribution System C69JR for use with a travel trailer that has a gvwr of 6500 Lbs. I am going to be upgrading to a 3/4 ton truck with a 2.5 receiver. Can you provide me some options for how I can utilize my existing curt system with a 2.5 receiver? I know there are reducer sleeve options, clamps, new shanks, etc. Its a bit overwhelming from my perspective. Thank you!
asked by: Kip K
Expert Reply:
Hey Kip, no worries at all! You actually just need a new shank like the Curt # C17131!
It fits your new truck's 2-1/2" receiver, works with your existing Curt TruTrack 2P # C69JR, and provides up to 3-1/4" of drop or 6-3/4" of rise.
You can reuse the rest of your weight distribution system without needing reducer sleeves or clamps, which also helps minimize play and rattling in the receiver. Just readjust the hitch for your new truck!
Do you mostly use your travel trailer for local camping trips or longer road trips?
Product Page this Question was Asked From
Curt Weight Distribution Shank for 2-1/2" Hitches - 6-3/4" Rise - 3-1/4" Drop
- Accessories and Parts
- Weight Distribution Hitch
- Shanks
- 1400 lbs TW
- Fits 2-1/2 Inch Hitch
- Round - 3 Inch Drop
- Trunnion - 2 Inch Drop
- Round - 6 Inch Rise
- Trunnion - 6 Inch Rise
- CURT
more information >
Continue Researching
- Q&A: Recommended Shorter Drop Weight Distribution Shank for a 2-1/2" Hitch
- Q&A: Brackets that Allow Equal-i-zer Weight Distribution to Be Used with 8 inch Tall Trailer Frame
- Q&A: Recommended Magnetic 2-1/2" to 2" Reducer Sleeve for a Weight Distribution System
- Q&A: Availability of Extended 2-1/2" Shank for Equal-i-zer Weight Distribution Hitch
- Article: How to Measure for Trailer Hitch Drop
- Article: 5 Things to Know About Weight Distribution Hitches
- Q&A: How Do I Change My Curt TruTrack From a 2" Shank to a 2-1/2" Shank?
- Q&A: What is the Bolt Hole Spacing and Diameter of the 2-1/2 Equal-i-zer Weight Dist Shank FA88FR?
- Q&A: Looking For Extended Weight Distribution Shank To Solve Tailgate Clearance Problem
- Article: Which Sway Control Hitch is Right For Your Trailer?
- Article: 2 Steps for Finding the Right Weight Distribution Hitch Size
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Breakaway Kit Installation for Single and Dual Brake Axle Trailers
- Article: Trailer Lighting Requirements


Kip K.
11/7/2026
Mostly local/regional, but do have a long trip planned this spring.