bing tracking image
Q & A Icon

Replacement Wiring Harness Options for Thule Transporter Combi 665C Cargo Carrier  

Published 11/05/2026

Question:

Hello. I need a replacement wiring harness for my Thule Transporter Combi 665C as all wires were destroyed by rodents. Based on internet search, I believe its Thule Replacement Wiring Harness TH05254. Do you have any available or know where I can acquire one? I appreciate your guidance and assistance. Thanks!

0

Expert Reply:

Hello John! You're correct, Thule TH05254 is the original replacement wiring harness for your Transporter Combi 665C. Unfortunately, it's been discontinued, so we can no longer order it.

I recommend a DIY route using the 20' 4-way wiring harness # A20WB along with two 3-prong taillight connectors # A45PB to replace the damaged wiring, assuming your existing lights use the standard 3-prong connections.

You'll need to splice the connectors into the new harness and trim the excess wiring to length. The original harness also has two separate connections for the license plate light, which you should be able to recreate using terminals from a local auto parts store.

Are your existing taillights still in good condition, or did the rodents damage those too?

expert reply by:
0
Andrew N
John S. profile picture

John S.

11/5/2026

Andrew Thanks for the prompt reply & DIY guidance How can I check whether the existing tail lights work without the harness? Or are you asking whether there's evidence of damage to the lights based on external exam? If so, let me know what I should look for. Do you have replacement taillights, ideally with brighter LED bulbs?

Andrew N. profile picture
Etrailer Expert

Andrew N.

11/5/2026

@JohnS You're welcome John. Happy to help. I would assume they work as long as the housing isn't cracked and damaged, but if you still have the connecter then you can hook up 12v power from a battery to test or just wait until you hook up the new harness. And yes we have brighter LED upgrades. The Optronics # STL35RB is a confirmed fit for your Transporter 665C. We've physically test-fitted these in the original rubber mounts, and they work with the 3-prong connectors # A45PB I recommended earlier.

Product Page this Question was Asked From


Q & A Icon

Continue Researching

See More Q&A Expert Answers >>