Replacement Trailer Hub Recommendation for Stratos Trailer with 3,000 lb Axle
Updated 10/20/2026 | Published 10/19/2026 >
Question:
Can you tell me what trailer hub assembly I need for this Stratos trailer?
asked by: Gary B
0
Expert Reply:
Hey Gary, the Dexter Trailer Idler Hub Assembly part # 84545UC1-EZ is correct for a Dexter Torflex 3,000 Lb Axle. The 3,000 lb axle uses the same hubs as a 3,500 lb axle. This is for the idler hub which has a 5 on 4-1/2" bolt pattern. Are you wanting to have a spare on hand or did your hub fail?
expert reply by:
Jameson C
0
Product Page this Question was Asked From
Dexter Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 4-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Idler Hub
- EZ Lube
- Pre-Greased
- Standard
- L68149 / L44649
- Standard Grade
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- Dexter
more information >
Continue Researching
- Shop: Dexter Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 4-1/2 - Pre-Greased
- Q&A: What Information Do You Need to Order a Correct Replacement Axle?
- Q&A: Victron Smart Dongle vs Cerbo GX Explained for MultiPlus-II Remote Control
- Q&A: Replacement Trailer Hub Assembly for Dexter 8-248 Hubs
- Q&A: Looking for Pre-Greased 3,500 Idler Hub that is Galvanized for Trailer Axle
- Q&A: Which Bearing Kit for Dexter Axle 9747800
- Q&A: What is a #84 Spindle and How Do I Know I Have One On My Trailer?
- Q&A: Do You Have a Trailer Axle Rated for 3,500 Pounds, 82 1/2" Hub Face and 75" Spring Center?
- Article: Trailer Lighting Requirements
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Article: Trailer Tire Sizing
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: How to Bleed Your Trailer Surge Brakes
- Article: How to Measure a Trailer Axle


Gary B.
10/19/2026
The back seal is leaking grease. This hub leaked the same way before. Around 2019 I had a shop check the bearings and repack/replace because I was going to take it on a long haul. I am wondering if I need to replace it since it seems to be messed up again. Could you see the trailer decal I uploaded with the previous conversation I had when I was looking for a spare tire? Didn’t see how to attach images this time so I used my previous post to start this conversation. Thanks.