bing tracking image
Q & A Icon

Recommended Bearing Kit for a Boat Trailer w/ 3,500 lbs Capacity Axles  

Published 09/30/2026

Question:

I have a nationwide 2004 2 axle pontoon trailer and need to replace entire bearings and accessories including seals, bearings and grease cap

0

Expert Reply:

Welcome back Thomas and thanks for the information. Since your 2004 Nationwide tandem axle pontoon trailer has 3,500 lbs, I recommend the Lippert Complete Bearing Kit item # LC55ZP. This kit is sold per hub and includes new bearings, races, a seal, a tang washer, and a cotter pin. You'll need four if you're replacing all your trailer's bearings and seals.

As far as a grease cap goes, the EZ Lube Grease Caps item # DX69HR are typically what's needed for a 3,500 lbs axle hub. It is sold as a pair, has a removable plug for easy maintenance and will fit a 1.98" or 1.99" pilot hole diameter. I strongly recommend measuring the diameter of your hubs pilot hole with a digital caliper like item # PTW80157 to verify this is the correct size you need.

What kind of pontoon boat do you have? Feel free to answer this and throw in any other questions you have, where it says Add Comment.

expert reply by:
0
Jerred H
LC55ZP
LC55ZP
(click to enlarge)

Product Page this Question was Asked From


Q & A Icon

Continue Researching

See More Q&A Expert Answers >>