bing tracking image
Q & A Icon

Heavy Duty Hitch for Motorcycle Rack on 2026 CrossRoads Redwood 412GK  

Updated 09/28/2026 | Published 09/27/2026

Question:

Hello, I have a 45foot 2026 Redwood 412GK fifth wheel and a dual motorcycle rack with a 2inch receiver that has a max weight compacity of 600 lbs. Do you have a receiver trailer hitch that would carry this amount of tongue weight? I have a trailer manufacture locally that can install in by custom welding or bolting in on for me. -Tim

0

Expert Reply:

Hey Tim! For the 600 lb capacity you're looking for, I recommend the Curt Class V Universal Weld-On Hitch # C99CR. This has a 2" receiver and a 1,600 lb tongue weight capacity, so it will be more than enough for your dual motorcycle rack. It is a universal hitch with adjustable brackets, so your local shop can cut the brackets down to size and weld it to the frame of your Redwood.

You'll also want to verify the Redwood's frame can support the weight of the rack and motorcycles since the hitch capacity won't increase the capacity of the trailer frame.

What motorcycles will you be carrying?

expert reply by:
0
Robin H
Curt Class 5 Universal Weld-on Hitch
Curt Class 5 Universal Weld-on Hitch
(click to enlarge)
Tim R. profile picture

Tim R.

9/28/2026

A 2026 Kawasaki KLX 400 and a 2026 Kawasaki KLX 230S. Both weighing 300 pounds each.

Robin H. profile picture
Etrailer Expert

Robin H.

9/28/2026

@TimR with those two bikes you're looking at about 600 lbs plus the weight of the rack itself, so the # C99CR will give you plenty of capacity for the setup. I would just check with CrossRoads to verify the frame can support the total weight you'll be carrying at the rear of the 5th wheel.

Product Page this Question was Asked From


Q & A Icon

Continue Researching

See More Q&A Expert Answers >>