bing tracking image
Q & A Icon

Replacement Spindle For A 2006 Stirling Utility Trailer  

Updated 09/23/2026 | Published 09/22/2026

Question:

I have an old 2006 Stirling Utility trailer with a broken spindle on one side. Tried to get a replacement axle assembly from Westbrook but they could not provide. Looking to get a replacement spindle for this trailer. Current spindle is 8 inches long, upper portion diameter is 1.5 inches and lower part of spindle for bearing and nut is 1 1/16 inch..Will Part CE Smith Axle Weld work for me ?

0

Expert Reply:

Hi Randy!

The CE Smith Spindle Axle - Weld on - 1-1/16" Diameter # CES38WR will work for you, but you will need to use a 1/4" spacer to go over the "stub" end of the spindle. The area for the hub measures 1-1/16", so that matches what you are looking for perfectly, but the "stub" end only measures 1-1/4" (see included diagram). Out of all the spindles we currently carry, this will be the closest option available, so it is the one I would go with. It will just be a little more work to get it installed.

What are you using your trailer to carry?

expert reply by:
0
Lazer S
CE Smith Spindle CES38WR Measurements
CE Smith Spindle CES38WR Measurements
(click to enlarge)
Randy profile picture

Randy

9/23/2026

Thanks Laser....The trailer is light duty...I've used it for my motorcycle, my snomobile, supplies from the lumber yard, junk that I am taking to the dump/transfer station or scrap yard. (It's only 4 foot wide so I am restricted with loads. My lawn tractors and ATV are too wide).

Lazer S. profile picture
Etrailer Expert

Lazer S.

9/23/2026

@Randy You're very welcome! Have fun out there and just let me know if there is anything else I can help with!

Product Page this Question was Asked From


Q & A Icon

Continue Researching

See More Q&A Expert Answers >>