Locking Hitch Pin Set for Curt Adjustable 2-Ball Mount
Updated 09/23/2026 | Published 09/19/2026 >
Products Featured in This Question
Question:
What is the correct InfiniteRule 3-pin set for the C79NR?
asked by: Jeff
Expert Reply:
Thanks for reaching out Jeff. Unfortunately, we don't carry a dedicated locking pin set specifically for the Curt Adjustable 2-Ball Mount # C79NR, but we can put together a combination that will work. The pins that secure the adjustable ball platform to the shank are 3/4" in diameter with a 3-3/4" usable span. The locking pins included with the InfiniteRule Ball Mount Hitch Lock # IR36FR will work for securing the ball platform to the adjustable shank.
To secure the entire ball mount to your truck's receiver, you'll need a standard 5/8" locking hitch pin, assuming you have the typical 5/8" receiver pin hole. For that connection, I'd recommend the Fastway Trailer Hitch Receiver Lock # FA86-00-3160. Using these together will allow you to lock both the adjustable ball platform to the shank and the complete ball mount to your truck.
What are you planning to tow that requires such a heavy-duty ball mount?
Product Page this Question was Asked From
Curt Adjustable 2-Ball Mount - 2-1/2" Hitch - 5-1/2" Drop, 4-1/2" Rise - 20K
- Trailer Hitch Ball Mount
- Adjustable Ball Mount
- Two Balls
- 2 Inch Ball
- 2-5/16 Inch Ball
- Steel Shank
- Drop - 5 Inch
- Rise - 4 Inch
- Fits 2-1/2 Inch Hitch
- 10000 lbs GTW
- 20000 lbs GTW
- Anti-Rattle Shank
- CURT
more information >
Featured Help Information
Instructions
Continue Researching
- Q&A: Total Length for Curt 20K 2-Ball Mount 45937
- Q&A: How Much Drop Does BulletProof Hitches 2-Ball Mount Have
- Article: How to Measure for Trailer Hitch Drop
- Q&A: Recommended Shorter Drop Weight Distribution Shank for a 2-1/2" Hitch
- Q&A: Best Trailer Hitch For 2005 Chevy Silverado 2500HD Pulling Two Horse Bumper Pull Trailer
- Article: The 5 Best Trailer Drop Hitches You Can Buy
- Q&A: What is the Threaded Hole on the Ball Retainer for on the Weigh Safe 180 Hitch 2-Ball Mount WS34MR?
- Q&A: Can Aluminum Trinity Series Trailer Wheel # TA74XR Handle 225/75-15 PSI
- Article: Trailer Wiring Diagrams
- Article: Is It Illegal to Leave My Hitch on My Truck?
- Q&A: Looking For Locking Pins For My B&W Tow And Stow Pintle Hook
- Article: Timbren Suspension Enhancement Systems
- Article: Choosing the Right Suspension Kit for Your Truck and Trailer
- Article: Best 5th Wheel to Gooseneck Adapters (2023)


Jeff
9/23/2026
Thanks Chris! If I understand correctly, there is not a single key solution from InfiniteRule that includes the receiver pin? What is specific about my factory receiver hitch (2023 F350) that InfiniteRule doesn't have a pin for it?