bing tracking image
Q & A Icon

Weight Distribution System for Shorlandr Boat Trailer  

Updated 09/23/2026 | Published 09/19/2026

Question:

I have a Dodge Durango and tow a Shorlandr trailer with a Lund Pro V Bass boat 1875 18 feet. I’m getting some sway on certain highways and want to eliminate that. The guys over at Hensley their device wont fit suggested I check with your CS department for product advice. I have had this happen once or twice over the past few years. I recently got new tires and they look/feel/ride fine but have gotten some noticeable say 3-4 times over my last 2 outings. Very concerned. Thanks!!

0

Expert Reply:

Thanks for reaching out Michael. For a boat trailer like your ShoreLand'r, I wouldn't jump straight to adding a sway control device. Boat trailers often have surge brakes, pole tongues, and/or folding or swing-away tongues, all of which can limit which weight distribution and sway control systems can be used. I'm assuming your ShoreLand'r has a pole tongue. If so, a traditional weight distribution system would require a pole tongue adapter, such as the Equal-i-zer Pole-Tongue Adapter # EQ95-01-5950, to provide mounting points for the spring bar brackets. If your trailer also has surge brakes or a swing away tongue, we'll need to be careful when selecting a system. Not every weight distribution or friction sway control system is compatible with those features.

Based on the boat and trailer information you provided, I'd estimate your loaded trailer weight is around 3,000 lbs or less. That's also toward the lower end of the operating range for many of our weight distribution systems. For example, the Curt Round Bar Weight Distribution System with Friction Sway Control # C17062 would be rated way too high for your application. When selecting a weight distribution system, we want the trailer's loaded tongue weight to fall as close to the middle of the operating range as possible. Using a system that's rated too high can result in an unnecessarily stiff setup and poor performance.

Before adding mechanical sway control, I'd first make sure the trailer is properly loaded and balanced. A boat trailer that's too light on the tongue can be susceptible to sway. As a general guideline, you want approximately 10–15% of the loaded trailer weight on the hitch, while still remaining within the tongue weight limits of your Durango and receiver. With a boat trailer, things like boat position, batteries, fuel, coolers, and other gear can make a significant difference in tongue weight. Even how far forward the boat sits on the trailer can affect stability.

A good approach would be to weigh the boat and trailer fully loaded as you normally tow it, then check the actual tongue weight. You can do this with a tongue weight scale like the Big Truck Big RV Tongue Weight Scale # BTBRV004. That will tell us whether trailer balance may be contributing to the sway before adding additional equipment.

If you can let me know whether your ShoreLand'r has surge brakes, a swing-away tongue, as well as your loaded trailer and tongue weights, I'd be happy to narrow down which sway control or weight distribution options are actually compatible with your setup.

expert reply by:
0
Christopher H
Denny profile picture

Denny

9/23/2026

I gave a Eam 1500. Put system on my truck. Trailer is a 4200 lb. Jayco. Works well in the Wyoming winds.

Christopher H. profile picture
Etrailer Expert

Christopher H.

9/23/2026

@Denny Glad the # C17062 is working well for you! Appreciate the feedback.

Product Page this Question was Asked From


Q & A Icon

Continue Researching

See More Q&A Expert Answers >>