Base Plate Kit and Parts Needed to Flat Tow 2014 Jeep Wrangler JK with Ranch Hand Bull Nose Bumper
Updated 07/28/2014 | Published 07/26/2014 >
Products Featured in This Question
Question:
I have a 2014 jeep wrangler jk rubicon 4door. It has a Ranch Hand Bull Nose bumper. I currently have a Falcon 2 tow bar and want to make sure I can mate up to my tow bar. Is this the correct part? Thanks
asked by: Mike
Expert Reply:
I spoke to my contact at Roadmaster and we came up with a solution for you. It will require a little bit of fabrication but it should work. What you will need first is the Roadmaster MS Base Plate Bracket part # 1437-3. You will need to remove the brackets you have bolted to your bumper and then have these brackets welded in their place by a qualified welder.
In addition to the base plates, you will also need a compatible tow bar, safety cables, lighting, and supplemental braking to flat tow your vehicle. The most popular compatible tow bar is the Falcon 2, # RM-520. For safety cables you can use # RM-643. The coiled design helps keep the cables off of the ground.
For lighting you can use the bulb and socket kit, # RM-155, and not have to worry about cutting and splicing into the vehicle wiring.
And finally, most states now require supplemental braking in the vehicle being flat towed. The easiest system to set up and use is the Even Brake proportional system, # RM-9400, that applies the vehicle brakes in proportion to how much the two vehicle is braking. This is the safest way to stop and it reduces wear and tear on both vehicles.
I have included a couple of helpful links to our articles on flat towing for you. Be sure to consult the vehicle owners manual for more specific information on flat towing your vehicle.
Product Page this Question was Asked From
Roadmaster Direct-Connect Base Plate Kit - Removable Arms
- Tow Bar Base Plate
- Removable Draw Bars
- Hitch Pin Attachment
- Partially Hidden
- Roadmaster
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Shop: Base Plate for Tow Bar
- Shop: Roadmaster Direct-Connect Base Plate Kit - Fixed Arms
- Search Results: blue ox trailer hitch
- Search Results: base plate for tow bar
- Search Results: trailer hitch
- Search Results: tow bar
- Shop: Blue Ox Base Plate Kit - Removable Arms
- Shop: Blue Ox Alpha Non-Binding Tow Bar - RV Mount - 2" Hitch - 8,500 lbs
- Q&A: Parts Needed to Tow a 2012 Jeep Wrangler with Rock Crawler Bumper Behind a Motor Home
- Q&A: Parts Needed To Adapt From Roadmaster StowMaster Tow Bar To Non-Binding Motorhome Mounted Tow Bar
- Q&A: Recommended Base Plate for Towing a 2010 Toyota FJ Cruiser w/ a Roadmaster Sterling Tow Bar
- Q&A: Comparing the Falcon 5250, Falcon 2, and Falcon All Terrain Tow Bars
- Q&A: What do I Need to Flat Tow a Jeep Wrangler JK with Factory Bumper
- Q&A: Parts Needed For Flat Towing a 2017 Jeep Wrangler Unlimited Rubicon
- Article: We Used 34 RV Tow Bars, and These are the Best for Flat Towing
- Article: Flat Towing Package for 2007-2018 JK Jeep Wrangler and Wrangler Unlimited
- Article: Must-Have Flat Towing Components
- Q&A: Recommended Complete Flat Tow System for Toyota FJ Cruiser
- Article: Flat Towing Package for 1998-2006 Jeep Wrangler
- Article: Roadmaster Vehicle Specific Base Plates





