Looking for Replacement Trailer Hub for Yacht Club Boat Trailer 169B

Updated 09/01/2026 | Published 08/29/2026

Products Featured in This Question

Trailer Idler Hub Assembly for 2K Axles - 13" to 15" Wheels - 5 on 4-1/2 - Pre-Greased

(1542)

$54.90

Easy Grease Trailer Idler Hub Assembly for 2K Axles - 4 on 4 - L44649 Bearings - Pre-Greased

(1124)

$45.68

Question:

Looking for replacement trailer hub assemblys for a yacht club boat trailer. Model 169b 1 1/16 spindle 2000 lb axle. Bearing sizes now are 44649. Do you stock any that are pregreased with marine grade grease? If not what are my options? Thank you

asked by: Brandon S

Expert Reply:

Hey Brandon, yes we do have exactly what you are looking for. If your wheels have a 5 lug bolt pattern you would want the part # AKIHUB-545-2-LF-2K or if instead you have a 4 lug bolt pattern you would want the part # AKIHUB-440-2-EZ-2K. These are both both pre-greased with marine grease and have the same bearing numbers as what you have so they will fit right onto your spindle.

expert reply by: Jameson C

Brandon S.

8/30/2026

Thank you, they are 5 lug. Is this the only option?

Jameson C.

8/31/2026

@BrandonS Here's every option: https://www.etrailer.com/dept-pg-Trailer_Hubs_and_Drums-sf-Idler_Hub-pt-Pre~Greased-sz-5_on_4~1%7C2_Inch-pc-For_2000_lbs_Axles.aspx

Helpful Links

dept-pg-trailer_hubs_and_drums-sf-idler_hub-pt-pre~greased-sz-5_on_4~1%7c2_inch-pc-for_2000_lbs_axles.aspx

John

9/1/2026

every spring I tow my boat from St. louis to NW Wisconsin. Normally I take apart the hubs, inspect and repack the bearings and replace the seals. This year I purchased the replacement pre-greased hubs. It took me longer to get them out of the box than it did to install them. Only issue was I had to end up using the old nuts that were on the axle. Towed the boat back and forth to Wisconsin with no-issues.