bing tracking image
Q & A Icon

Will A 205/65-10 Tire Replace A 6.90/6.00-9 Tire On An Older Pontoon Trailer?  

Updated 08/26/2026 | Published 08/18/2026

Question:

will this replace a 6.90 x 9 on a older pontoon trailer.

0

Expert Reply:

Hey Greg, thanks for reaching out. I see you already got some tires on order, but I wanted to make sure your question was answered. A 205/65-10 like the Kenda # AM3H330 can potentially replace a 6.90/6.00-9, but it all comes down to fender clearance.

The 6.90/6.00-9 tires are approximately 6.5" wide and 21.1" in diameter. If we bump that up to a 205/65-10, those are about 8.3" wide and 20.8" in diameter. So, the diameter is similar, but the width increases by a good bit. Ideally, you want at least 1" between the inside of the tire and the frame of the trailer. If you want to run larger tires, you'll need to measure the clearance with the current tire setup and see if you have room to go larger. In most cases, it is best to stick with the stock tire size.

What do you use the pontoon for? Fishing, or just cruising around?

expert reply by:
0
Jesse M
Kenda 6.90/6.00-9 Bias Trailer Tire with 9" White Wheel - 4 on 4 - Load Range C
Kenda 6.90/6.00-9 Bias Trailer Tire with 9" White Wheel - 4 on 4 - Load Range C
(click to enlarge)
Richard profile picture

Richard

8/26/2026

I bought a set for my older Camper Trailer as both the tire and wheel were in bad shape. My only concern was that the center hole in the wheel wouldn't be large enough to allow for the rather large hub to go through. I'm happy to say that the wheels and tire fit great. I feel that they are a great product for the money.

Product Page this Question was Asked From


Q & A Icon

Continue Researching

See More Q&A Expert Answers >>