Brake Mounting Flange to Welded End Horizontal Measurement
Updated 08/18/2026 | Published 08/12/2026
Question:
What is the horizontal offset from flange to welded end?
asked by: Sam S
0
Expert Reply:
Thanks for letting us help Sam. On the #84 E-Z Lube Spindle w/ Brake Flange # TRU87FR the horizontal measurement from the front face of the brake mounting flange to the welded end is 2-3/4". I will attach a graphic illustrating this below.
Are you looking to replace a specific spindle and need this dimension?
expert reply by:
Christopher H
0
TRU87FR Horizontal Measurement
(click to enlarge)
(click to enlarge)
Product Page this Question was Asked From
#84 E-Z Lube Spindle w/ Brake Flange for 3,500-lb Trailer Axles - 4" Drop
- Trailer Spindles
- EZ Lube Spindle
- With Flange
- L68149
- 2-3/8 Inch Diameter
- Round
- For 3500 lb Axle
- TruRyde
more information >
Continue Researching
- Article: How Much Solar Power Do I Need For My RV?
- Q&A: What Type of Grease Comes in CE Smith Trailer Hubs
- Q&A: Replacement Spindle and Axle Options For a 3,500LB Trailer Axle With Bent 4 Drop Spindle
- Q&A: Replacement Hub/Rotor Assembly for a Dexter Boat Trailer Axle DX67HR
- Q&A: Can the Spring Seats Be Moved on the Dexter 3,500 LB Drop Axle
- Q&A: Replacement Axle For a Stealth 7.5X12 Cargo Trailer 3,500-lb 93.5" Hub Face 77.5" Spring Center
- Q&A: How to Confirm Fit of #84 E-Z Lube Spindle with Brake Flange for 3,500-lb Trailer Axles - 4" Drop
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Article: Trailer Wiring Diagrams
- Q&A: Will TruRyde Trailer Hub and Drum Assembly Fit 2019 Travel Trailer With 3,500 lb Axle
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: How to Measure a Trailer Axle
- Article: Breakaway Kit Installation for Single and Dual Brake Axle Trailers
- Article: How To Measure And Replace Everything In Your Hub Assembly