bing tracking image
Q & A Icon

What White Solera Awning Cover do I Need?  

Updated 08/10/2026 | Published 08/03/2026

Question:

I would like to confirm my part is the correct one before I purchase.

0

Expert Reply:

Hello Sarah,

Welcome to etrailer! I'm glad you found us.

The first thing you'll want to do is verify that you have a Solera awning. I attached an image that shows the two different head cover styles. The easiest way to tell them apart is by looking for the Lippert (LCI) logo. If your head cover has the logo, it's the older style and has a more rounded, bubbly appearance. If it doesn't have the logo, then you have the newer Regal style, which has a longer, sleeker design.

If you have the LCI logo style, you'll need the Replacement Idler Head Front Cover # LC289563. If you're replacing the drive head side, you'll need the Replacement Manual Override Cover # LC351831.

If you have the Regal style, you'll need the Replacement Regal Idler Head Front Cover # LC88VR. If you're replacing the drive head side, you'll need the Replacement Regal Manual Override Cover # LC37FR (if you need the drive head, you will also need # LC95ED, thanks again for that call out below Gary).

If you're still not sure which style you have, feel free to reply directly to the email you'll receive with a picture of your awning head. I'd be happy to take a look and confirm which replacement you need.

Did you lose one on the road? Any big adventures you are gearing up for, where are you headed to next?



expert reply by:
0
Kate F
Different Solera Covers
Different Solera Covers
(click to enlarge)
Gary B. profile picture

Gary B.

8/8/2026

Kate answered your question very well. I tagged a branch going down a narrow road and lost the idler cover. Mine are the Regal style (no logo). I also wound up replacing the drive head cover because it was scratched up. Please note that if you replace the drive head side you have to order the grommet separately - the cover doesn't come with it. The are fairly easy to replace, just have to extend the awning out about 6" to be able to access the screws from the back. Good luck

Kate F. profile picture
Etrailer Expert

Kate F.

8/10/2026

@GaryB Thanks for the response, and the excellent call out Gary. @Sarah if you need the Regal drive head make sure to grab a Replacement Manual Override Grommet for Solera Powered RV Awnings - Qty 1 # LC95ED.

Product Page this Question was Asked From


Q & A Icon

Continue Researching

See More Q&A Expert Answers >>