Will 12V PWM Filter VGR64VR Fix PWM Wiring Issue for Furrion Vision S for 2025 E350 Ford Van
Updated 08/07/2026 | Published 08/02/2026
Question:
Will the VGR64VR fix my pwm problem on my 2025 E350 ford van. I have a furrion vision S back up camera. Thanks.
asked by: Ryan D
Expert Reply:
Hey Ryan, yes the 12V PWM Filter for RV Backup Camera Systems # VGR64VR that you referenced is exactly what you are looking for and is the correct harness to fix the PWM wiring issue you are having with your Furrion Vision S system. Do you have the original Vision S or the S+?
Stephen D.
8/7/2026
If you run a Chevy or a GMC you will need this part to be installed between the units power supply and the camera. It is just a splice. If you do not install this the camera will go in an out and drive you crazy as you drive down the road. Chevy and GMC do not have a constant flow of electricity from the hook up. These are easy to install and solves the current flow issue. Have installed them in Heartland Trailer Trailer, East to West 36' 5th wheel and a Keystone Montana 3901RK. It is an inexpensive must have.
Larry E.
8/7/2026
It may work for certain vehicles, but it didn't work when I tried it with my Chevy Colorado, basically a waste of money in my case.
Dave
8/7/2026
Ryan, I too had the issue with a newer tow vehicle. I bought a 2024 GMC Sierra and the rear camera on my travel trailer kept going on and off about every 10 seconds. Drove me nuts! Found out GM used a "pulse" voltage signal to the tail lights. Like a mach9ine gun, it sent voltage to the lights. The truck and trailer lights didn't notice the Milliseconds pauses but the camera did. It' seemed pricey but in the end was well worth it. Was a piece of cake to install and now no more on and off issues. Camper Dave
Ed
8/7/2026
I know late model GMs with led lights are pulse with modulated so you need constant 12 voltage at the camera when the lights are on. I'm not sure if Fords are the same
Product Page this Question was Asked From
12V PWM Filter for RV Backup Camera Systems - Hardwire
- Accessories and Parts
- Backup Camera
- RV Camera System
- Cables and Cords
- Power Line Filter
- Voyager
more information >
Continue Researching
- Q&A: No Signal And PWM Fix For Furrion Vision S Camera System Connected To 2022 GMC
- Q&A: Furrion Camera Has Power but Won't Pair
- Q&A: Does 2025 Chevy Silverado 2500HD Require Power Adapter for Install of Furrion Vision S+ System
- Q&A: Will Voyager 12V PWM Filter Allow Furrion Vision S to Work With 2025 GMC Sierra Denali
- Q&A: Can I Use One of the 12V PWM Filters for a Four RV Backup Camera System?
- Q&A: Troubleshooting A Furrion Vision S RV Camera System That Fades In And Out Of Pairing
- Q&A: How Many 12V PWM Filters is Needed on a Multi Cam Furrion Vision S System
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Article: Trailer Wiring Diagrams
- Article: How to Mount a Truck Bed Camper
- Article: RV Pre-Departure Checklist
- Article: The Best Trailer Tongue Locks for Preventing Trailer Theft
- Article: Choosing the Right Suspension Kit for Your Truck and Trailer
- Article: Holiday 2025 | Best Gifts for RVing
Peter
8/7/2026
Works great on for our gmc. Had the lippert 7 pin plug adapter which worked but it was heavy and one more thing to connect. The filter was easy to install and is now something I don’t think about.