Will Install of Curt Hitch on 2024 Honda Passport Still Allow Hands Free Liftgate to Function
Updated 08/06/2026 | Published 08/02/2026 >
Question:
If my 24 Passport BLK Edition has the touch to open sensor do I need an adaptor?
asked by: Joe H
Expert Reply:
Hey Joe, when installing the Curt hitch part # C13421 on your 2024 Honda Passport the hands free liftgate sensors will be partially obstructed. Typically you can just kick to either side of the hitch opening and the hands free liftgate will still function but Honda actually sells and an adapter for this that relocates the sensor so you get better activation from it. If it were me I would install the hitch first and see how well the hands free function works and if it's decent enough functionality and then from there decide if you want to go with the sensor kit.
When we installed a similar Draw Tite hitch on a 2021 Passport we found that it worked just fine by kicking to the side of the hitch opening. If you scroll down to the install video I linked on this page and fast forward to 1:55 you will see how it still works.
Product Page this Question was Asked From
Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Trailer Hitch
- For Towing
- Class III
- 750 lbs TW
- 5000 lbs GTW
- 6000 lbs WD GTW
- 2 Inch Hitch
- 750 lbs WD TW
- Concealed Cross Tube
- CURT
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Q&A: Will 2022 Honda Passport Hands Free Liftgate Still Work with Trailer Hitch Installed
- Q&A: Recommended Hitch for a 2023 Honda Passport
- Q&A: What Trailer Hitch Will Fit The 2025 Honda Passport?
- Q&A: Which Hitch Is Best for Carrying E-Bikes and Light Towing with a 2021 Jeep Cherokee?
- Q&A: Does Install of etrailer Hitch on 2023 Honda Passport Require Rear Fascia Replacement
- Q&A: Weight Distribution Recommendation for 2026 Honda Passport Towing 3,500 lb Trailer
- Article: How to Choose the Right Trailer Hitch Class
- Q&A: Do All Models of 2021 Honda Passport Fit Tekonsha Trailer Wiring # 118809
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: How to Measure for Trailer Hitch Drop
- Article: Trailer Lighting Requirements
- Article: Ball Mount Basics: Weight Capacity, Class, and Size
- Article: Wiring Trailer Lights with a 4-Way Plug (It's Easier Than You Think)
- Article: Rust Prevention




Pete
8/6/2026
Mine did not work at all after the installation. YMMV or you can relocate the kick sensor.