Availability Of Latch Repair Kit For Fulton 2" Ball Coupler

Updated 08/05/2026 | Published 07/28/2026

Question:

I have what I believe is a Fulton lever coupler on the tongue of my trailer. Im wanting to replace the mechanism that clamps the 2 inch ball when closed, but need help finding the correct parts. I can send pictures if that helps.

asked by: Mike M

Expert Reply:

Hey Mike, thanks for reaching out. Sounds like you are needing a latch repair kit for a Fulton coupler. Unfortunately, we no longer offer any replacement parts or repair kits for these. If your coupler is in need of a new latch, your best option will be to replace the coupler entirely.

The Channel Tongue Trailer Coupler # CT-5003-Z is a great option for replacing a standard 2" ball coupler. It will fit a standard 3" tongue and has a standard 3" bolt hole spacing. This is what I recommend provided the total weight of the trailer is less than 5,000 lbs.

What kind of trailer do you have?

expert reply by: Jesse M

Channel Tongue Trailer Coupler - Trigger Latch - Zinc - 2" Ball - Bolt On - 5,000 lbs
(click to enlarge)

Eddie S.

8/4/2026

Best to replace the whole thing anyway. I had to replace mine because I bent the heck out of it when I ran into it with my tractor. The coupler was easy to replace and works better than what I had before.

Jesse M.

8/4/2026

@EddieS Yep thats a good call. Glad to hear the new coupler worked out. Thanks for sharing!

Gary

8/4/2026

Hope this helps Mike. Had the same problem with my 86 Hobie trailer. Needed to replace the 2-in ball coupling mine was just flat wore out. Bought this replacement piece it was reasonably priced and fit into the exact same holes as were already drilled in my trailer 3-in tongue. It's been installed for a year and used several times works great. If requested I could send a picture.