Folding Cargo Carrier Recommendation for a 2010 Toyota Sequoia that Will Not Sag

Updated 07/22/2014 | Published 07/20/2014

Products Featured in This Question

24x60 etrailer Cargo Carrier for 2" Hitches - Steel - Tilting - Folding - 500 lbs

(602)

$218.94

19x60 Curt Cargo Carrier for 2" Hitches - Aluminum - Folding - 500 lbs

(311)

$192.93

Question:

I will returning a cabelas folding hitch cargo rack 60x20. This thing sagged like crazy on the back of my 2010 sequoia. I am looking for something better for around $150 for roughly the same size. Do your racks sag? Which one would recommend?

asked by: Jared G

Expert Reply:

I have a few cargo carriers that I think you will be interested in. First, check out the Curt Aluminum Folding Cargo Carrier, # C18100. This is a lightweight carrier that will not sag and it falls within your budget. I have attached a demonstration video of this carrier that also shows a test drive with a load on the carrier.

Another option is the etrailer Steel Folding Cargo Carrier, # e98874. This carrier is right around your price range and it has a longer shank with a 2 inch rise. I have attached a demonstration video of this carrier as well.

When choosing a folding cargo carrier, it is important to make sure it will not hit your bumper when folded up. To determine if either of these carriers will hit the bumper, you will want to take one important measurement. Measure from the center of the hitch pin hole on your trailer hitch to the rear edge of your bumper. If this measurement is less than 9-1/2 inches, then either carrier will fit. If it is more than 9-1/2 inches but less than 9 inches, then you will want to go with the steel carrier.

expert reply by: John H