Pin Depth for Hitch Receiver # e98861

Question

Question:

What is the pin depth? is essential information for knowing whether the product will work with the RigD RambleSwing® Pro.

asked by: Mark

0

Expert Reply:

Hey Mark,

Thanks for your question.

The measurement from the front of the receiver opening to the center of the hitch pin hole on the etrailer Trailer Hitch Receiver - Custom Fit - Class IV - 2" # e98861 is 2-1/2 inches.

I believe that's the dimension you're looking for to verify compatibility with the swing-away hitch accessory you're considering.

The # e98861 is a confirmed fit for 1996-2027 Chevy Express and GMC Savana vans.

If you are looking for a different dimension, please let me know.

expert reply by: Christopher H

0

Mark

7/15/2026

Thank you, Christopher. What is the measurement from the center of the hitch pin hole on the etrailer Trailer Hitch Receiver - Custom Fit - Class IV - 2" # e98861 to the deepest end of the receiver? Thanks again, Mark

Christopher H.

7/15/2026

@Mark On # e98861, the distance from the center of the hitch pin hole to the back of the receiver opening is 4-1/2 inches.

Answer 1

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 2

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 3

Hey Jeff. There is definitely a correlation between weight and capacity. I've listed the weight of all three of the Power Mountain Tallboy Off-Road Bottle Jacks we have below: Power Mountain Tallboy Off-Road Bottle Jack - 7-15/16" to…

view full answer...

Answer 4

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 5

Hey Ricardo! Yes, the Curt Trailer Hitch Receiver #C82RJ is the hitch Curt is working on for the new 2027 Telluride. This is a pre-order since Curt hasn't finished the design. It does not include wiring. The wiring harness for the 2027 is also up…

view full answer...

Answer 6

Hi David! There are quite a few hitches offered for your 2026 Honda Odyssey, so I definitely understand wanting to know the differences. There are basically three styles available for you and I have them broken out below: Exposed Crosstube: etrailer…

view full answer...

Answer 7

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 8

Hello Joe, Thank you for reaching out! The Power Mountain Tallboy Off-Road Bottle Jack - 11-5/16" to 27-1/16" Lift - 12 Tons #PM94FR does have the capacity you’d need, but since your fifth wheel’s frame sits about 25" off the ground,…

view full answer...

Answer 9

Hey Mike! The Power Mountain Tallboy Off-Road Bottle Jack #PM34FR can be stored in that manner (with the oil plug facing up), but my contact at Power Mountain stressed that it should only be done for a short period of time, so I recommend setting it…

view full answer...

Answer 10

Hey Mark, Thanks for your question. The measurement from the front of the receiver opening to the center of the hitch pin hole on the etrailer Trailer Hitch Receiver - Custom Fit - Class IV - 2" #e98861 is 2-1/2 inches. I believe that's the…

view full answer...

Pin Depth for Hitch Receiver # e98861

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching