Best Load Leveling Kit for 2013 Chevy Silverado 1500
Updated 07/08/2026 | Published 06/30/2026 >
Products Featured in This Question
Question:
2013 Chevy Silverado 1500 with newly installed truck camper dealer installed helper springs above leaf springs to help the truck carry the load. The truck leans about an inch down on the driver side. That is the side with most of the camper weight. Would the timbren help level the load, or is their a better solution? One timbren is about 1/2 inch from touching the axle and the other about 7/8 of an inch. Attached is a photo showing the springs attached by dealer and timbren on drivers side taken from the back facing front.
asked by: Ken
Expert Reply:
Hey Ken,
Instead of going with bump stops like Timbren Rear Suspension Enhancement System # TGMRCK15S, I'd recommend going with airbags for better load-leveling. The advantage here is that you can increase the individual air bags by 1 PSI in order to get a completely level fit, instead of being stuck with the static height of a bump stop. For your 2013 Chevy Silverado, you can go with Air Lift LoadLifter 5000 Air Helper Springs - Rear Axle # AL57204, but this package does not fit trucks with an 8' bed. If your truck has an 8' bed, instead you can go with Air Lift LoadLifter 5000 Air Helper Springs - Rear Axle # AL57211. Bump stops are good, but these heavy duty air bag kits are great. They will include all the mounting hardware specific to your truck and will support loads of up to 5,000 lbs and can always be deflated when not in use to give your truck a better ride.
What kind of camper are you putting on your truck? How often do you plan on using this?
Product Page this Question was Asked From
Timbren Rear Suspension Enhancement System
- Vehicle Suspension
- Towing/Load Leveling
- Bump Stops
- Suspension Only
- Extra Heavy Duty
- Rear Axle Suspension Enhancement
- Timbren
more information >
Featured Help Information
Instructions
Continue Researching
- Q&A: Looking for Reliable Replacement for Dometic RM2351 RV Fridge
- Q&A: What Timbrens and Spacers do I Need for My 2019 Ram 1500 with 6" Lift?
- Q&A: Comparing SumoSprings Solo Custom Helper Springs for a 2008 Chevy Silverado 1500
- Q&A: Is Weight Distribution Needed for 2019 Chevy Silverado 1500 Towing 2019 Keystone Hideout 22RBWE
- Article: Top Weight Distribution Hitches for a Buttery Smooth Ride
- Q&A: Brake Controller for 2022 Chevrolet Traverse With Factory Tow Package
- Q&A: Best Air Bags For 2015 Chevy Silverado 1500 Towing Camper Trailer
- Q&A: Correct SumoSpring Kit for a 2016 Chevy Silverado 1500 with In-Bed Camper
- Article: Choosing the Right Suspension Kit for Your Truck and Trailer
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Best Air Bag Suspension 2025
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Article: 2 Steps for Finding the Right Weight Distribution Hitch Size
- Article: 7 Common Questions Everyone Has About Trailer Tires


Sidney
7/7/2026
The Timbrens work great. I got e trailers spacer kit and put in the 1” spacer so the timbrens sit right on the axle the gap was causing a bump on some rough roads. It makes the ride stiffer but it’s ready when I need to pull my dump trailer. Since you are having unequal weight I think Jerry’s recommendation of air bags would be best that way you can adjust each side.