Recommended Weight Distribution System for a Trailer w/a 350 lbs Tongue Weight
Published 06/14/2026 >
Products Featured in This Question
Question:
My TV has a max tongue weight capacity of 350. I plan to pull a small tear trailer with loaded tongue weight of 340 or just under the TV max. I would like to add a WDH to level out the vehicles and stabilize handling. Will the WDH add to the trailer tongue weight and put me over the TV tongue max or will the weight distribution negate the addition? Also would your recommend the C95MJ or another WDH for this scenario? thanks yall
asked by: John R
Expert Reply:
Hey John, thanks for the information! For a trailer with a 350 lbs tongue weight, I recommend the Equal-i-zer Weight Distribution System w/ 4-Point Sway Control item # EQ37060ET. This system works with tongue weights between 200 lbs - 600 lbs so it'll definitely work well for your trailer. It won't be overcapacity or provide a stiff uncomfortable feeling like the Curt you referenced will.
Curt makes some great products but their weight distribution systems aren't very effective in addressing sway. I wouldn't recommend their weight distribution systems.
The actually weight of the Equal-i-zer item # EQ37060ET does not add to the tongue weight. The weight of the system is distributed to the front axle.
The Equal-i-zer item # EQ37060ET has built in four point sway control that will keep your trailer in line with your tow vehicle when you're going down the highway and make a sudden lane change or get passed by a semi. It's really helpful when you get sideswiped by a gust of wind too. This system includes a 2" shank and a 2-5/16" hitch ball.
Please note you will need room on your trailer's coupler between 27" - 32" back from where the hitch ball mounts. This is for the sway control brackets.
What kind of trailer do you have?
You can add this information, along with any other questions you have, where it says Add Comment.
Product Page this Question was Asked From
Equal-i-zer Weight Distribution System w/ 4-Point Sway Control - 6,000 lbs GTW, 600 lbs TW
- Weight Distribution Hitch
- WD With Sway Control
- Trunnion Bar
- Fits 3 Inch Frame
- Fits 4 Inch Frame
- Fits 5 Inch Frame
- Fits 6 Inch Frame
- Includes Shank
- 2-5/16 Inch Ball
- Fits 2 Inch Hitch
- Allows Backing Up
- 400 lbs
- 500 lbs
- Equal-i-zer
more information >
Featured Help Information
Instructions
Continue Researching
- Search Results: dometic rv vents and fans
- Search Results: fantastic fan
- Shop: WFCO Auto Detect RV Converter and AC/DC Distribution Panel - 12V - 35 Amp
- Shop: Dometic FanTastic Roof Vent Assembly Upgrade Kit - Clamp-on - Power Lift - 14-1/4"x14-1/4"
- Article: 5 Things to Know About Weight Distribution Hitches
- Q&A: Recommended Brake Controller and Weight Distribution for 2019 Honda Pilot Towing 2026 Geo Pro 17LE
- Q&A: Recommended Weight Distribution Hitch for 2022 Keystone Springdale Mini 1750RD
- Q&A: Availability of 2-5/16" Ball for Andersen Weight Distribution Hitch
- Q&A: Recommended Weight Distribution System for a 4,000 lbs Trailer
- Q&A: What Size Wire And Circuit Breaker Should Be Used For The 12v Circuit On A 7-Way?
- Article: Which Sway Control Hitch is Right For Your Trailer?
- Q&A: Weight Distribution Recommendation for 2024 Micro Minnie 2108
- Q&A: Recommended WeighSafe Weight Distribution Hitch for a 25 Ford F250 Towing a 26 Grand Design Mav
- Article: How to Measure for Trailer Hitch Drop
- Article: 2 Steps for Finding the Right Weight Distribution Hitch Size
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Top Weight Distribution Hitches for a Buttery Smooth Ride
- Article: What Do I Need To Tow A Trailer?


