Replacement Steps for 2017 Entegra Cornerstone

Updated 06/17/2026 | Published 06/13/2026

Question:

Steps for a 2017 entagra conerstone

asked by: Tom Y

Expert Reply:

Hey Tom! Do you currently have the Kwikee 47 series on your Entegra Cornerstone? It looks like that is what was used on the 2014, but we have no way of confirming this for your 2017 without you checking.

Assuming you do, the Replacement Steps, Motor, and Control for Kwikee RV Electric Steps - 47 Series # LC427247 you were looking at will fit. These have a 30-3/8" wide mounting plate and will use the existing holes and wiring harness for installation. If you have different steps let me know in the comments below and I'll help you find the right replacement.

expert reply by: Robin H

Replacement Steps on 2014 Entegra Cornerstone
(click to enlarge)

Max

6/17/2026

Well Robin you are incorrect, series 47 steps are not what is on the 14 Cornersone however they are the only ones that will work with quite a bit of work on the step opening. Also the magnets for the original steps won’t work with this new step. You will need new magnets that e-trailer should send with the steps. That is the easy part. They will bolt right up once you have the fiberglass cut out. Good luck!

Robin H.

6/17/2026

@Max thanks, that was based on another 2014 owner who replaced them and said everything matched aside from trimming 1/8" of fiberglass. Even within the same model and year we don't have a way of knowing what is on any given motorhome or trailer, and manufacturers tend to use whatever has the lowest cost and is available. Any feedback like that definitely helps, thanks again!