bing tracking image
Q & A Icon

Does Left or Right Thread Phoenix USA Rear Wheel Center Cap Fit Passenger Side  

Updated 06/23/2026 | Published 06/13/2026

Question:

Which thread, right or left do you put on the passenger side?

0

Expert Reply:

Hey Robert! The thread direction on these Phoenix USA center caps is based on the mounting bracket used on the wheel, and is not universally tied to the passenger or driver side.

A good way to check is to look at the part number on your existing bracket. If the bracket part number ends with an "L", you'll need the left thread Phoenix USA Rear Wheel Center Cap # PXQ2010L. If it does not have the "L", the matching right hand thread version is # PXQ2010.

What motorhome are you working on?

expert reply by:
0
Robin H
Rear Wheel Center Cap
Rear Wheel Center Cap
(click to enlarge)
Robert J. profile picture

Robert J.

6/23/2026

I am going purchase the complete unit including the bracket. I have seen confliction information on which thread should be used to reduce the risk of back spending for each side. Which, my original unit did. So can you clear up what the intended thread is used for each side of the RV?

Robin H. profile picture
Etrailer Expert

Robin H.

6/23/2026

@RobertJ in most wheel-mounted applications, the driver's side uses a left-hand thread and the passenger side uses a right-hand thread.

Product Page this Question was Asked From


Q & A Icon

Continue Researching

See More Q&A Expert Answers >>