Replacement Hubs for a Jet Ski Trailer

Updated 06/15/2026 | Published 06/12/2026

Products Featured in This Question

4" Carbon Fiber Digital Caliper

(26)

$12.32

Question:

I have a 2000 ez loader double jet ski trailer and replacing both hubs and wheel, is this the right part number?

asked by: John C

Expert Reply:

Welcome back John. Unfortunately, there's no database that shows me what the correct replacement hub is for your 2000 EZ Loader double jet ski trailer. Without knowing what size spindle your axle has or a part number off of your current hubs, I can't tell you which one fits without some more information.

What you'll want to do is pull one of the hubs and look at the two bearings. They should have numbers stamped into the sides of them. I'll need those part numbers to identify your spindle size which will tell me what hub you need.

If they do not have numbers stamped into the side you'll need to measure your spindles using a digital caliper like item # PTW80157. I'll need the C and D dimensions shown in the diagram below.

Additionally, I am also going to need to know your lug nut pattern so you do not have to change wheels. I have linked an FAQ below that'll show you how to measure them.

You can add this information, along with any other questions you have, where it says Add Comment.

expert reply by: Jerred H