3.5K Idler Hub With 5 On 4.5 Bolt Pattern Not Pre-Greased
Updated 06/14/2026 | Published 06/10/2026
Products Featured in This Question
Question:
AKIHUB -545-35 K Is this available not pre greased? Ty
asked by: Jon N
Expert Reply:
Welcome back Jon!
I do have a couple potential options for you, but oddly enough, we do not have the # AKIHUB-545-35-K not pre-greased. That said, check out the following part:
etrailer Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 5 on 4-1/2 - Galvanized # AKIHUB-545-35-G-EZ-K
This is a galvanized version of the # AKIHUB-545-35-K and includes all the same parts, but it does not greased. Little more expensive due to that galvanized finish though.
Do you mind if I ask why you prefer something not already greased? And what are you needing this for?
Product Page this Question was Asked From
Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 4-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Idler Hub
- Pre-Greased
- Standard
- L68149 / L44649
- Standard Grade
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
Continue Researching
- Q&A: Correct Replacement for TDE 46210 Trailer Hub
- Q&A: Replacement Hub for Nitro Z7 TrailStar Boat Trailer
- Q&A: Do You Know the Difference Between a 11033 Hub and My 11033L Hub?
- Q&A: Replacement Hub Assembly for T.D.E. 11033
- Q&A: What is the Difference Between Trailer Wheels and Vehicle Wheels
- Q&A: Which Caliper Should Be Used With The Dexter 9-3/4" Hub-and-Rotor Assembly DX82UR?
- Q&A: Replacement for UFP HD1377 Trailer Hub/Drum
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: Trailer Wiring Diagrams
- Article: Most Popular Wheel Bearings
- Article: Trailer Tire Sizing
- Article: How to Bleed Your Trailer Surge Brakes
Jami
6/14/2026
I bought these quite a while ago as I was rebuilding my trailer and they have been fine. Easy to install and perfect if you don't have the special tools to rebuild your existing hubs.