DeeMax Disc Brake Kit with Stainless Steel Brake Lines for 2024 Brinkley Z2900
Updated 06/11/2026 | Published 06/08/2026
Products Featured in This Question
Question:
Ive decided to refit my 2024 Brinkley Z2900 fifth wheel with disk brakes, and am interested in the Deemax package you offer. It looks very complete, however, I want to swap out the stock brake lines for steel braided lines, which I think you offer. is that possible and what would be the package cost with that change? Thank you.
asked by: Gordon H
Expert Reply:
Hey Gordon, we can definitely help but we don't have a kit exactly like the # DE66AR that also has a stainless brake line kit. So instead we'd need to piece it all together. You'd need the part # DE47SR for the actuator, then for the disc brake hub/rotors you'd want the part # DE68YR, and then for the brake line kit part numbers # DE78KR, two of the # DE93KR, # DE78GR, two of the # DE99NR, 12 of part # DE74SR, # DE54SR, # DE34SR and you'd be set.
Larry S.
6/10/2026
Good call Gordon H on the stainless braided lines. The brass fittings on the brake line kit are very fragile. If you over tighten you will pull the threads and you will have leaks. I had to change out several lines and the 4 way brass block. You will like the disc brakes. For once I feel confident I can stop. I’m pulling a 40’ Big Country. Should have done this sooner. I wish this system worked with my in dash digital brake controller. The Analog Tekonsha is working good and doing the job.
Jeremy P.
6/11/2026
I upgraded my brakes to this kit last year on my 2020 Northpoint. This kit is a game changer and i'll never own another 5th wheel without disk brakes.
Jameson C.
6/11/2026
Product Page this Question was Asked From
DeeMaxx Disc Brake Kit w/ Actuator for Tandem Axle Trailers - 13" Hub/Rotor - 8 on 6-1/2 - 7K
- Trailer Brakes
- Disc Brakes
- Marine Grade
- 8 on 6-1/2 Inch
- Hub and Rotor
- 1/2 Inch Studs
- 7000 lbs Axle
- 15 Inch Wheel
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- 17 Inch Wheel
- 17-1/2 Inch Wheel
- DeeMaxx
more information >
Continue Researching
- Search Results: trailer brakes
- Search Results: hydraulic brake lines
- Q&A: What is the Toque Specifications for the 1/2” Stainless Steel DeeMaxx Bolt?
- Search Results: cotter pins
- Shop: DeeMaxx Braided Stainless Steel Hydraulic Brake Line, 3/16" Male Inverted Flares, 20'
- Video: DeeMaxx Disc Brake Kit Review and Installation
- Shop: Kodiak Hydraulic Brake Line Kit - Tandem Axle - 20'
- Shop: DeeMaxx Alpha G1600 Electric Over Hydraulic Actuator for Disc Brakes - 1,600 psi
- Shop: DeeMaxx Disc Brake Kit - 13" Hub/Rotor - 8 on 6-1/2 - Maxx Coating - 9/16" Bolts - 7K
- Video: Review of DeeMaxx Trailer Brakes - Replacement Stainless Steel Caliper Lock Nut - DE82WR
- Shop: Lippert Underchassis Double Bin Storage Unit w/ Spare Tire Carrier for RVs - 99-1/2" Long
- Shop: MORryde Hidden RV Slide Out Storage Tray - 22" x 32" - 70 Percent Extension - 25 lbs
- Shop: Replacement Nut for DeeMaxx Disc Brake Brackets - 8K - Stainless Steel
- Article: How to Bleed Your Trailer Surge Brakes
- Q&A: Are The Mounting Brackets On The DeeMaxx Disc Brake Kit # DE72FR Also Stainless Steel?
- Shop: Trailer Hitch
- Search Results: trailer hitch
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Article: Trailer Wiring Diagrams
- Q&A: Instructions to Wire a Trailer for Electric Brakes
- Video: Hands-On with the Hub Saver Hub and Wheel Protector
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Search Results: trailer tires and wheels
- Shop: Trailer Wiring
- Article: How to Measure for Trailer Hitch Drop
- Q&A: How to Measure to Determine the Size Trailer Brakes Needed For Hydraulic Drum Replacement
- Shop: Suspension Enhancement
- Search Results: trailer hubs and drums
- Shop: Gooseneck Hitch
- Article: How to Measure Your Trailer Wheel Bolt Pattern
on Trailer Brakes
Joe T.
6/10/2026
You will definitely like the performance of this brake system. The kit is complete. The stopping power is unbelievable. My old drum brakes did absolutely nothing. I wrapped the brake lines in plastic wire loom. They're up out of the way enough and the rig is not going to flex that much. When you bleed the system DON'T leave the breakaway "key" pulled the entire time. It will overheat and melt. I found out the hard way ??. Overall this is a great product and good company to deal with.