How to Install MORryde X-Factor Crossmember On Trailer With OEM Correct Track Hangers
Updated 04/28/2026 | Published 04/25/2026
Products Featured in This Question
Question:
How do I install moryde X factor cross braces on hangers like this? Picture included plus what sized wet bolt would I need? The distance from yellow locking plate to yellow locking plate is 2.25” Also, I REALLY WANT the road master comfort ride system, I hate the equalizer design, but my hanger bolt holes are 4.25” from the frame to the center of hole. How can I safely install it without replacing my hangers?
asked by: Luke E
(click to enlarge)
Expert Reply:
Hey Luke! You can install the MORryde X-Factor Crossmember # MR33WR on your trailer but you will need an additional adapter. What you have there are the Correct Track hangers so you need the MORryde X-Factor Crossmember Adapter Kit for OEM Correct Track Hangers # MR93WR.
Regarding the Roadmaster Comfort Ride # RM-2460-2570, the main issue is those Correct Track hangers. Those hangers change the suspension geometry and add an adjustable pivot point, which the Comfort Ride system isn’t really designed around. This can make the setup unpredictable which you really don't want. I recommend replacing them if you want to go that route.
Have you considered upgrading just the equalizer instead? Pairing that with the X-Factor crossmember can make a noticeable improvement in ride quality without having to rework the hanger setup.
What kind of trailer are you working on?
(click to enlarge)
Product Page this Question was Asked From
MORryde X-Factor Crossmember for Standard Frame Hangers
- Accessories and Parts
- Trailer Suspension Parts
- Crossmember
- MORryde
more information >
Featured Help Information
Instructions
Continue Researching
- Video: Review of Shocker Hitch Air Equalizer Weight Distribution Hitch - SHK77YR
- Q&A: Can Gen-Y Hitch Torsion Ball Mount be Used with an Equal-i-Zer Weight Distribution System
- Video: In-Depth Review of the Gen-Y Torsion Weight Distribution Shank
- Video: A Closer Look at the 7-Way Trailer Adapter for Towing Trailers with LED Lights
- Video: Complete Breakdown of the Gen-Y Torsion Weight Distribution Shank
- Shop: Replacement Shock for Trailair Air Ride and Flex Air 5th Wheel King Pins - Qty 1
- Shop: Gen-Y Torsion Weight Distribution Shank - 2" Hitches - 6-1/2" Drop/Rise - 1,100 lbs TW
- Shop: 7-Way Trailer Adapter for Towing Trailers with LED Lights
- Shop: Shocker Air Equalizer for Weight Distribution Hitch - 2" Hitch - 12K - 4" Drop
- Video: Review of Trimax Locks Trailer Hitch Lock - 2 Inch Receiver Lock Trigger Coupler Lock - TMX93SR
- Shop: Trimax 2" Hitch Receiver Lock and Trigger-Style Coupler Latch Lock Set - Keyed Alike
- Q&A: Does the X-Factor Crossmember for Standard Frame Hangers Require Longer Suspension Bolts?
- Shop: Curt Dual Ball Attachment for Weight Distribution Shanks
- Video: Breaking Down the Curt Dual Ball Attachment for Weight Distribution Shanks
- Shop: 3/4" Pins with Clips for Convert-A-Ball Weight Distribution Shank Accessories - Qty 2
- Video: Ball Mount Adapter for Convert-A-Ball Cushioned Weight Distribution Shank Spec Review
- Search Results: gen y hitch pin
- Q&A: How Much Preload Should SumoSprings kit for Trailer Suspension Have When Installed
- Q&A: What's the Best SuperSpring Sumo Spring Kit for my 2017 Toyota Tundra
- Q&A: Compressed and Uncompressed Length for the Roadmaster Replacement Shock Absorber
- Q&A: How Much Slack Is Needed In Trailer Wire Connection To The Tow Vehicle?
- Q&A: Should SumoSprings Have Preload With Vehicle Unloaded
- Search Results: trailer suspension parts
- Search Results: weight distribution hitch
- Search Results: gen~y hitch trailer hitch ball mount