Recommended Hitch for a 2002 Suburban 2500
Updated 09/01/2026 | Published 03/26/2026 >
Products Featured in This Question
Question:
Im looking for a Draw Tite 45515 or 41930 or Reese 45013 or 45715. Can find one anywhere. Its for a 2002 Suburban 2500.
asked by: Donald W
Expert Reply:
Hey Donald. I have a hitch for your 2002 Chevy Suburban 2500 but all of those Draw-Tite and Reese hitches you mentioned are gone. Draw-Tite bought out Reese years ago and now their parent company is going through a massive fraud investigation and filed for bankruptcy.
To add a hitch to your 2002 Chevy Suburban 2500, I recommend the Curt item # 14080. This custom fit class IV hitch has a 2" receiver and a 10,000 lbs towing capacity. I verified with Curt that this is the hitch you'll need for your 2500 model.
What do you plan on towing with your new hitch?
You can add this information, along with any other questions you have, where it says Add Comment.
Product Page this Question was Asked From
Curt Trailer Hitch Receiver - Custom Fit - Class IV - 2"
- Trailer Hitch
- For Towing
- Class IV
- 1000 lbs TW
- 10000 lbs GTW
- 12000 lbs WD GTW
- 2 Inch Hitch
- 1200 lbs WD TW
- Visible Cross Tube
- CURT
more information >
Featured Help Information
Instructions
Continue Researching
- Q&A: Recommended Class V Hitch for a 2010 Suburban 2500
- Q&A: How to Determine Where the Curt Hitch 14080 Will Install In Relation to Rear Bumper
- Q&A: Does Curt Hitch For 2002 Chevy Suburban Require Bolting to Rear Bumper Brace
- Q&A: Compatibility of Curt Class V C15324 on 2001 Chevy Suburban
- Q&A: Recommended Trailer Wiring Harness For 2006 Chevrolet Avalanche
- Q&A: Solution for Class V Hitch on 2004 Chevy Suburban Looking for part 41930 or 45515
- Q&A: Do Draw Tite Hitches # 41930 and DT45515 Both Fit 2006 Chevy Suburban
- Article: How Level Should a Tow Bar Be When Flat Towing
- Article: Flat Towing Package for 2006-2007 Chevrolet HHR
- Article: 2005-Current Volkswagen Touareg, Audi, or Porsche Cayenne
- Article: Trailer Hitch Receiver Sizes
- Article: 2 Steps for Finding the Right Weight Distribution Hitch Size
- Article: How to Choose the Right Trailer Hitch Class
- Article: My Trailer Hitch Doesn't Fit



Will K.
9/1/2026
I am in the same boat as Donald and looking for a better aftermarket solution than this Curt hitch. Im not sure if yall are aware or not, but these gmt800 suburbans have a weak spot/crumple zone in the frame just forward of where the factory hitch and the Curt 14080 bolt to the frame. The frame has a large hole in each side just forward of the hitch attachment point and then the frame transitions from a fully boxed cross section to more of a c-channel section rearward of that and where the factory and Curt hitches attach. High tongue weight puts a really large moment on this much weaker cross section. I'm plenty sure the Curt hitch itself is strong enough for the 10,000/1,000 lb rating but that doesnt mean that the frame can handle it. The Drawtite hitch has an extension that extends forward of the crumple zone and helps stiffen up the frame across that weak zone and shift the bending moment to a much stronger frame cross section like a typical truck frame has.