Recommended 2,000 lbs Axle w/a 60" Hub Face and 48" Spring Center

Updated 03/30/2026 | Published 03/24/2026

Products Featured in This Question

Trailer Idler Axle Beam with Easy Grease Spindles - 60" Long - 2,000 lbs

(259)

$150.87

U-Bolt Kit for Mounting 2,000-lb, Round Trailer Axles - 4-1/4" Long U-Bolts

(2126)

$42.48

Spring Seat for Typical 2,000-lb, Round Trailer Axles with 1-3/4" Diameter - Qty 1

(648)

$16.55

Question:

Looking for a 2000 overslung straight trailer axle with spindles 60×48 running 10 wheels

asked by: Johnny J

Expert Reply:

Hey Johnny, thanks for the information! The Trailer Idler Axle Beam with Easy Grease Spindles item # e48GR is going to match your dimensions perfectly. It's a 2,000 lbs axle, with a 60" hub face, and spring seats mounted at 48" on center. Like all of our replacement axles, this one is an underslung but I have the parts you'll need to mount it under your trailer's leaf springs for a overslung orientation.

What you'll need to do is install two of the Spring Seats item # TRSS175 on the opposite side of the axle. This will give you a mounting point to use the U-Bolt Kit item # APUBR-10 to attach the axle to your leaf springs.

These U-bolts are 4-1/4" long, which is the longest we have for a 1-3/4" diameter axle. It is highly recommended to replace the U-bolts because they are not designed to be retorqued after the initial installation.

What kind of trailer do you have and what lug nut pattern are your wheels?

You can add this information, along with any other questions you have, where it says Add Comment.