Recommended Flat Towing Parts for a 2024 Jeep Wrangler Rubicon
Updated 03/03/2026 | Published 02/27/2026 >
Products Featured in This Question
Question:
I have a 2008 winnebago aspect 26a and just bought a 2024 jeep rubicon. What do i need to know to find the right equipment to tow jeep behind motorhome.. This is my first time Thank you
asked by: Janice B
Expert Reply:
Hey Janice! Thanks for all the information and congrats on your new Jeep! I'm going to list out all the parts you'll need based on the factory options. If you have an aftermarket bumper or have made any other changes to your Jeep, I will need to know that and you can add this information where it says Add Comment along with any questions you have. Does your Jeep have the Parksense feature? The wiring harness that controls your Jeep's lights are going to be different if you do. I've listed both harnesses but you'll only need one.
Here are the parts you will need to flat tow your 2024 Jeep Wrangler Rubicon:
Tow Bar and Safety Chains - etrailer XHD Non-Binding Tow Bar item # e84ZR
Base Plate Kit - Roadmaster Direct-Connect Base Plate Kit - Removable Arms item # RM-521453-5
Wiring Harness - Roadmaster Diode 7-Wire to 6-Wire Flexo-Coil Wiring Kit item # RM-15267. This diode kit allows you to use your Jeep's tail lights and wiring system while preventing feedback from your RV. This kit will come with a 6-way socket for your Jeep as well as an adapter cable to go from the vehicle to the motorhome.
Please note that if your Jeep has ParkSense Proximity Sensors then you will need the Roadmaster Smart Diode Kit for Variable Voltage LED Tail Lights - 7-Way to 6-Way Adapter Cord item # RM63MR.
Supplemental Braking System - Curt RVi Series Shadow 2 Flat Tow Brake System item # RVI94FR for a permanent install or the Curt RVi Series 4 Portable Flat Tow Brake System item # RVI44FR for a portable system.
Please note you will also need the Roadmaster Stop Light Switch Kit item # RM-751495 if you go with the permanently installed item # RVI94FR. This makes sure your braking system isn't applying when it's not supposed to.
High Low Adapter - The tow bar needs to be within 3" of level. If you measure the height of the inside top of the hitch receiver tube on your RV, and the height difference is more than 3 inches above/below the base plate tab height, you'll need a high/low adapter. I have linked a FAQ article that explains all this in more detail along with our selection of adapters.
Product Page this Question was Asked From
etrailer XHD Non-Binding Tow Bar for Roadmaster Direct-Connect Base Plate - RV Mount - 10,500 lbs
- Tow Bar
- Hitch Mount
- Telescoping - Non-Binding
- Steel
- 10500 lbs
- Fits Roadmaster Base Plates
- Stores on RV
- Cables Included
- etrailer
more information >
Featured Help Information
Instructions
Miscellaneous Media





Continue Researching
- Q&A: Base Plate Options For A 2026 Jeep Gladiator Mojave
- Q&A: Recommended Flat Towing Parts for a 2025 Ford Bronco w/a Standard Bumper and LED Lights
- Q&A: Recommended Flat Towing Parts for a 2021 Jeep Wrangler Rubicon
- Q&A: Best Flat Tow Setup For 2025 Ford Ranger
- Q&A: Tow Bar and Braking System Recommendation for 2016 Chevy Equinox that's Flat Towed
- Q&A: Can Curt RVi Series Shadow 2 Be Installed In 2025 Jeep Wrangler
- Q&A: Recommended Flat Towing Parts for a 2023 Jeep Wrangler 4xe
- Article: Flat Towing Package for 2012-2014 Honda CR-V
- Article: Flat Towing Package for 2015-2018 Chevrolet Silverado 2500
- Article: Best Vehicles to Flat Tow Behind an RV
- Article: Flat Towing Package for 2025 Jeep Wrangler
- Article: How to Choose a High-Low Adapter
- Article: Flat Towing Package for 2007-2018 JK Jeep Wrangler and Wrangler Unlimited
- Article: How Level Should a Tow Bar Be When Flat Towing



Janice B.
3/2/2026
I was told the steel bumper and warn wench was a aftermarket add on. I guess i need to find out more about what i do have. Do you know of anyone in my area that installs this equipment.. Cortez, co 81321 I know it's not something i could do myself. Thanks